26 Containers library [containers]

26.2 Container requirements [container.requirements]

26.2.1 General container requirements [container.requirements.general]

Containers are objects that store other objects. They control allocation and deallocation of these objects through constructors, destructors, insert and erase operations.

All of the complexity requirements in this Clause are stated solely in terms of the number of operations on the contained objects. [Example: The copy constructor of type vector<vector<int>> has linear complexity, even though the complexity of copying each contained vector<int> is itself linear. end example]

For the components affected by this subclause that declare an allocator_­type, objects stored in these components shall be constructed using the function allocator_­traits<allocator_­type>​::​rebind_­traits<U>​::​​construct and destroyed using the function allocator_­traits<allocator_­type>​::​rebind_­traits<U>​::​​destroy, where U is either allocator_­type​::​value_­type or an internal type used by the container. These functions are called only for the container's element type, not for internal types used by the container. [Note: This means, for example, that a node-based container might need to construct nodes containing aligned buffers and call construct to place the element into the buffer. end note]

In Tables 83, 84, and 85 X denotes a container class containing objects of type T, a and b denote values of type X, u denotes an identifier, r denotes a non-const value of type X, and rv denotes a non-const rvalue of type X.

Table 83 — Container requirements
ExpressionReturn typeOperationalAssertion/noteComplexity
semanticspre-/post-condition
X​::​value_­type T Requires:  T is Erasable from X (see [container.requirements.general], below) compile time
X​::​reference T& compile time
X​::​const_­reference const T& compile time
X​::​iterator iterator type whose value type is T any iterator category that meets the forward iterator requirements. convertible to X​::​const_­iterator. compile time
X​::​const_­iterator constant iterator type whose value type is T any iterator category that meets the forward iterator requirements. compile time
X​::​difference_­type signed integer type is identical to the difference type of X​::​iterator and X​::​const_­iterator compile time
X​::​size_­type unsigned integer type size_­type can represent any non-negative value of difference_­type compile time
X u; Postconditions: u.empty() constant
X() Postconditions: X().empty() constant
X(a) Requires: T is CopyInsertable into X (see below).
Postconditions: a == X(a).
linear
X u(a);
X u = a;
Requires: T is CopyInsertable into X (see below).
Postconditions: u == a
linear
X u(rv);
X u = rv;
Postconditions: u shall be equal to the value that rv had before this construction (Note B)
a = rv X& All existing elements of a are either move assigned to or destroyed a shall be equal to the value that rv had before this assignment linear
(&a)->~X() void the destructor is applied to every element of a; any memory obtained is deallocated. linear
a.begin() iterator; const_­iterator for constant a constant
a.end() iterator; const_­iterator for constant a constant
a.cbegin() const_­iterator const_­cast<​X const&​>(a)​.begin(); constant
a.cend() const_­iterator const_­cast<​X const&​>(a)​.end(); constant
a == b convertible to bool == is an equivalence relation. equal(​a.begin(), a.end(), b.begin(), b.end()) Requires:  T is EqualityComparable Constant if a.size() != b.size(), linear otherwise
a != b convertible to bool Equivalent to !(a == b) linear
a.swap(b) void exchanges the contents of a and b (Note A)
swap(a, b) void a.swap(b) (Note A)
r = a X& Postconditions: r == a. linear
a.size() size_­type distance(​a.begin(), a.end()) constant
a.max_­size() size_­type distance(​begin(), end()) for the largest possible container constant
a.empty() convertible to bool a.begin() == a.end() constant

Those entries marked “(Note A)” or “(Note B)” have linear complexity for array and have constant complexity for all other standard containers. [Note: The algorithm equal() is defined in Clause [algorithms]. end note]

The member function size() returns the number of elements in the container. The number of elements is defined by the rules of constructors, inserts, and erases.

begin() returns an iterator referring to the first element in the container. end() returns an iterator which is the past-the-end value for the container. If the container is empty, then begin() == end().

In the expressions

i == j
i != j
i < j
i <= j
i >= j
i > j
i - j

where i and j denote objects of a container's iterator type, either or both may be replaced by an object of the container's const_­iterator type referring to the same element with no change in semantics.

Unless otherwise specified, all containers defined in this clause obtain memory using an allocator (see [allocator.requirements]). [Note: In particular, containers and iterators do not store references to allocated elements other than through the allocator's pointer type, i.e., as objects of type P or pointer_­traits<P>​::​template rebind<unspecified>, where P is allocator_­traits<allocator_­type>​::​pointer. end note] Copy constructors for these container types obtain an allocator by calling allocator_­traits<allocator_­type>​::​select_­on_­container_­copy_­construction on the allocator belonging to the container being copied. Move constructors obtain an allocator by move construction from the allocator belonging to the container being moved. Such move construction of the allocator shall not exit via an exception. All other constructors for these container types take a const allocator_­type& argument. [Note: If an invocation of a constructor uses the default value of an optional allocator argument, then the Allocator type must support value-initialization. end note] A copy of this allocator is used for any memory allocation and element construction performed, by these constructors and by all member functions, during the lifetime of each container object or until the allocator is replaced. The allocator may be replaced only via assignment or swap(). Allocator replacement is performed by copy assignment, move assignment, or swapping of the allocator only if allocator_­traits<allocator_­type>​::​propagate_­on_­container_­copy_­assignment​::​value, allocator_­traits<allocator_­type>​::​propagate_­on_­container_­move_­assignment​::​value, or allocator_­traits<allocator_­type>​::​propagate_­on_­container_­swap​::​value is true within the implementation of the corresponding container operation. In all container types defined in this Clause, the member get_­allocator() returns a copy of the allocator used to construct the container or, if that allocator has been replaced, a copy of the most recent replacement.

The expression a.swap(b), for containers a and b of a standard container type other than array, shall exchange the values of a and b without invoking any move, copy, or swap operations on the individual container elements. Lvalues of any Compare, Pred, or Hash types belonging to a and b shall be swappable and shall be exchanged by calling swap as described in [swappable.requirements]. If allocator_­traits<allocator_­type>​::​propagate_­on_­container_­swap​::​value is true, then lvalues of type allocator_­type shall be swappable and the allocators of a and b shall also be exchanged by calling swap as described in [swappable.requirements]. Otherwise, the allocators shall not be swapped, and the behavior is undefined unless a.get_­allocator() == b.get_­allocator(). Every iterator referring to an element in one container before the swap shall refer to the same element in the other container after the swap. It is unspecified whether an iterator with value a.end() before the swap will have value b.end() after the swap.

If the iterator type of a container belongs to the bidirectional or random access iterator categories, the container is called reversible and satisfies the additional requirements in Table 84.

Table 84 — Reversible container requirements
ExpressionReturn typeAssertion/noteComplexity
pre-/post-condition
X​::​reverse_­iterator iterator type whose value type is T reverse_­iterator<iterator> compile time
X​::​const_­reverse_­iterator constant iterator type whose value type is T reverse_­iterator<const_­iterator> compile time
a.rbegin() reverse_­iterator; const_­reverse_­iterator for constant a reverse_­iterator(end()) constant
a.rend() reverse_­iterator; const_­reverse_­iterator for constant a reverse_­iterator(begin()) constant
a.crbegin() const_­reverse_­iterator const_­cast<X const&>(a).rbegin() constant
a.crend() const_­reverse_­iterator const_­cast<X const&>(a).rend() constant

Unless otherwise specified (see [associative.reqmts.except], [unord.req.except], [deque.modifiers], and [vector.modifiers]) all container types defined in this Clause meet the following additional requirements:

  • if an exception is thrown by an insert() or emplace() function while inserting a single element, that function has no effects.

  • if an exception is thrown by a push_­back(), push_­front(), emplace_­back(), or emplace_­front() function, that function has no effects.

  • no erase(), clear(), pop_­back() or pop_­front() function throws an exception.

  • no copy constructor or assignment operator of a returned iterator throws an exception.

  • no swap() function throws an exception.

  • no swap() function invalidates any references, pointers, or iterators referring to the elements of the containers being swapped. [Note: The end() iterator does not refer to any element, so it may be invalidated. end note]

Unless otherwise specified (either explicitly or by defining a function in terms of other functions), invoking a container member function or passing a container as an argument to a library function shall not invalidate iterators to, or change the values of, objects within that container.

A contiguous container is a container that supports random access iterators and whose member types iterator and const_­iterator are contiguous iterators.

Table 85 lists operations that are provided for some types of containers but not others. Those containers for which the listed operations are provided shall implement the semantics described in Table 85 unless otherwise stated.

Table 85 — Optional container operations
ExpressionReturn typeOperationalAssertion/noteComplexity
semanticspre-/post-condition
a < b convertible to bool lexicographical_­compare( a.begin(), a.end(), b.begin(), b.end()) Requires: < is defined for values of T. < is a total ordering relationship. linear
a > b convertible to bool b < a linear
a <= b convertible to bool !(a > b) linear
a >= b convertible to bool !(a < b) linear

[Note: The algorithm lexicographical_­compare() is defined in Clause [algorithms]. end note]

All of the containers defined in this Clause and in [basic.string] except array meet the additional requirements of an allocator-aware container, as described in Table 86.

Given an allocator type A and given a container type X having a value_­type identical to T and an allocator_­type identical to allocator_­traits<A>​::​rebind_­alloc<T> and given an lvalue m of type A, a pointer p of type T*, an expression v of type (possibly const) T, and an rvalue rv of type T, the following terms are defined. If X is not allocator-aware, the terms below are defined as if A were allocator<T> — no allocator object needs to be created and user specializations of allocator<T> are not instantiated:

  • T is DefaultInsertable into X means that the following expression is well-formed:

    allocator_traits<A>::construct(m, p)
  • An element of X is default-inserted if it is initialized by evaluation of the expression

    allocator_traits<A>::construct(m, p)

    where p is the address of the uninitialized storage for the element allocated within X.

  • T is MoveInsertable into X means that the following expression is well-formed:

    allocator_traits<A>::construct(m, p, rv)

    and its evaluation causes the following postcondition to hold: The value of *p is equivalent to the value of rv before the evaluation. [Note: rv remains a valid object. Its state is unspecified end note]

  • T is CopyInsertable into X means that, in addition to T being MoveInsertable into X, the following expression is well-formed:

    allocator_traits<A>::construct(m, p, v)

    and its evaluation causes the following postcondition to hold: The value of v is unchanged and is equivalent to *p.

  • T is EmplaceConstructible into X from args, for zero or more arguments args, means that the following expression is well-formed:

    allocator_traits<A>::construct(m, p, args)
  • T is Erasable from X means that the following expression is well-formed:

    allocator_traits<A>::destroy(m, p)

[Note: A container calls allocator_­traits<A>​::​construct(m, p, args) to construct an element at p using args, with m == get_­allocator(). The default construct in allocator will call ​::​new((void*)p) T(args), but specialized allocators may choose a different definition. end note]

In Table 86, X denotes an allocator-aware container class with a value_­type of T using allocator of type A, u denotes a variable, a and b denote non-const lvalues of type X, t denotes an lvalue or a const rvalue of type X, rv denotes a non-const rvalue of type X, and m is a value of type A.

Table 86 — Allocator-aware container requirements
ExpressionReturn typeAssertion/noteComplexity
pre-/post-condition
allocator_­type A Requires: allocator_­type​::​value_­type is the same as X​::​value_­type. compile time
get_­- allocator() A constant
X()
X u;
Requires:  A is DefaultConstructible.
Postconditions: u.empty() returns true, u.get_­allocator() == A()
constant
X(m) Postconditions: u.empty() returns true, constant
X u(m); u.get_­allocator() == m
X(t, m)
X u(t, m);
Requires:  T is CopyInsertable into X.
Postconditions: u == t, u.get_­allocator() == m
linear
X(rv)
X u(rv);
Postconditions: u shall have the same elements as rv had before this construction; the value of u.get_­allocator() shall be the same as the value of rv.get_­allocator() before this construction. constant
X(rv, m)
X u(rv, m);
Requires:  T is MoveInsertable into X.
Postconditions: u shall have the same elements, or copies of the elements, that rv had before this construction, u.get_­allocator() == m
constant if m == rv.get_­allocator(), otherwise linear
a = t X& Requires:  T is CopyInsertable into X and CopyAssignable.
Postconditions: a == t
linear
a = rv X& Requires:  If allocator_­-
traits<allocator_­type>
​::​propagate_­on_­container_­-
move_­assignment​::​value is
false, T is MoveInsertable into X and MoveAssignable. All existing elements of a are either move assigned to or destroyed.
Postconditions: a shall be equal to the value that rv had before this assignment.
linear
a.swap(b) void exchanges the contents of a and b constant

The behavior of certain container member functions and deduction guides depends on whether types qualify as input iterators or allocators. The extent to which an implementation determines that a type cannot be an input iterator is unspecified, except that as a minimum integral types shall not qualify as input iterators. Likewise, the extent to which an implementation determines that a type cannot be an allocator is unspecified, except that as a minimum a type A shall not qualify as an allocator unless it satisfies both of the following conditions:

  • The qualified-id A​::​value_­type is valid and denotes a type ([temp.deduct]).

  • The expression declval<A&>().allocate(size_­t{}) is well-formed when treated as an unevaluated operand.

26.2.2 Container data races [container.requirements.dataraces]

For purposes of avoiding data races, implementations shall consider the following functions to be const: begin, end, rbegin, rend, front, back, data, find, lower_­bound, upper_­bound, equal_­range, at and, except in associative or unordered associative containers, operator[].

Notwithstanding [res.on.data.races], implementations are required to avoid data races when the contents of the contained object in different elements in the same container, excepting vector<bool>, are modified concurrently.

[Note: For a vector<int> x with a size greater than one, x[1] = 5 and *x.begin() = 10 can be executed concurrently without a data race, but x[0] = 5 and *x.begin() = 10 executed concurrently may result in a data race. As an exception to the general rule, for a vector<bool> y, y[0] = true may race with y[1] = true. end note]

26.2.3 Sequence containers [sequence.reqmts]

A sequence container organizes a finite set of objects, all of the same type, into a strictly linear arrangement. The library provides four basic kinds of sequence containers: vector, forward_­list, list, and deque. In addition, array is provided as a sequence container which provides limited sequence operations because it has a fixed number of elements. The library also provides container adaptors that make it easy to construct abstract data types, such as stacks or queues, out of the basic sequence container kinds (or out of other kinds of sequence containers that the user might define).

The sequence containers offer the programmer different complexity trade-offs and should be used accordingly. vector or array is the type of sequence container that should be used by default. list or forward_­list should be used when there are frequent insertions and deletions from the middle of the sequence. deque is the data structure of choice when most insertions and deletions take place at the beginning or at the end of the sequence.

In Tables 87 and 88, X denotes a sequence container class, a denotes a value of type X containing elements of type T, u denotes the name of a variable being declared, A denotes X​::​allocator_­type if the qualified-id X​::​allocator_­type is valid and denotes a type ([temp.deduct]) and allocator<T> if it doesn't, i and j denote iterators satisfying input iterator requirements and refer to elements implicitly convertible to value_­type, [i, j) denotes a valid range, il designates an object of type initializer_­list<value_­type>, n denotes a value of type X​::​size_­type, p denotes a valid constant iterator to a, q denotes a valid dereferenceable constant iterator to a, [q1, q2) denotes a valid range of constant iterators in a, t denotes an lvalue or a const rvalue of X​::​value_­type, and rv denotes a non-const rvalue of X​::​value_­type. Args denotes a template parameter pack; args denotes a function parameter pack with the pattern Args&&.

The complexities of the expressions are sequence dependent.

Table 87 — Sequence container requirements (in addition to container)
ExpressionReturn typeAssertion/note
pre-/post-condition
X(n, t)
X u(n, t);
Requires:  T shall be CopyInsertable into X.
Postconditions: distance(begin(), end()) == n
Constructs a sequence container with n copies of t
X(i, j)
X u(i, j);
Requires:  T shall be EmplaceConstructible into X from *i. For vector, if the iterator does not meet the forward iterator requirements, T shall also be MoveInsertable into X. Each iterator in the range [i, j) shall be dereferenced exactly once.
Postconditions: distance(begin(), end()) == distance(i, j)
Constructs a sequence container equal to the range [i, j)
X(il) Equivalent to X(il.begin(), il.end())
a = il X& Requires:  T is CopyInsertable into X and CopyAssignable. Assigns the range [il.begin(), il.end()) into a. All existing elements of a are either assigned to or destroyed.
Returns:  *this.
a.emplace(p, args) iterator Requires:  T is EmplaceConstructible into X from args. For vector and deque, T is also MoveInsertable into X and MoveAssignable. Effects:  Inserts an object of type T constructed with std​::​forward<​Args​>(​args)... before p.
a.insert(p,t) iterator Requires:  T shall be CopyInsertable into X. For vector and deque, T shall also be CopyAssignable.
Effects:  Inserts a copy of t before p.
a.insert(p,rv) iterator Requires:  T shall be MoveInsertable into X. For vector and deque, T shall also be MoveAssignable.
Effects:  Inserts a copy of rv before p.
a.insert(p,n,t) iterator Requires:  T shall be CopyInsertable into X and CopyAssignable.
Inserts n copies of t before p.
a.insert(p,i,j) iterator Requires:  T shall be EmplaceConstructible into X from *i. For vector and deque, T shall also be MoveInsertable into X, MoveConstructible, MoveAssignable, and swappable. Each iterator in the range [i, j) shall be dereferenced exactly once.
Requires: i and j are not iterators into a.
Inserts copies of elements in [i, j) before p
a.insert(p, il) iterator a.insert(p, il.begin(), il.end()).
a.erase(q) iterator Requires:  For vector and deque, T shall be MoveAssignable.
Effects:  Erases the element pointed to by q.
a.erase(q1,q2) iterator Requires:  For vector and deque, T shall be MoveAssignable.
Effects:  Erases the elements in the range [q1, q2).
a.clear() void Destroys all elements in a. Invalidates all references, pointers, and iterators referring to the elements of a and may invalidate the past-the-end iterator.
Postconditions: a.empty() returns true.
Complexity: Linear.
a.assign(i,j) void Requires:  T shall be EmplaceConstructible into X from *i and assignable from *i. For vector, if the iterator does not meet the forward iterator requirements, T shall also be MoveInsertable into X.
Each iterator in the range [i, j) shall be dereferenced exactly once.
Requires: i, j are not iterators into a.
Replaces elements in a with a copy of [i, j).
Invalidates all references, pointers and iterators referring to the elements of a. For vector and deque, also invalidates the past-the-end iterator.
a.assign(il) void a.assign(il.begin(), il.end()).
a.assign(n,t) void Requires:  T shall be CopyInsertable into X and CopyAssignable.
Requires: t is not a reference into a.
Replaces elements in a with n copies of t.
Invalidates all references, pointers and iterators referring to the elements of a. For vector and deque, also invalidates the past-the-end iterator.

The iterator returned from a.insert(p, t) points to the copy of t inserted into a.

The iterator returned from a.insert(p, rv) points to the copy of rv inserted into a.

The iterator returned from a.insert(p, n, t) points to the copy of the first element inserted into a, or p if n == 0.

The iterator returned from a.insert(p, i, j) points to the copy of the first element inserted into a, or p if i == j.

The iterator returned from a.insert(p, il) points to the copy of the first element inserted into a, or p if il is empty.

The iterator returned from a.emplace(p, args) points to the new element constructed from args into a.

The iterator returned from a.erase(q) points to the element immediately following q prior to the element being erased. If no such element exists, a.end() is returned.

The iterator returned by a.erase(q1, q2) points to the element pointed to by q2 prior to any elements being erased. If no such element exists, a.end() is returned.

For every sequence container defined in this Clause and in Clause [strings]:

  • If the constructor

    template <class InputIterator>
      X(InputIterator first, InputIterator last,
        const allocator_type& alloc = allocator_type());

    is called with a type InputIterator that does not qualify as an input iterator, then the constructor shall not participate in overload resolution.

  • If the member functions of the forms:

    template <class InputIterator>
      return-type F(const_iterator p,
                    InputIterator first, InputIterator last);       // such as insert
    
    template <class InputIterator>
      return-type F(InputIterator first, InputIterator last);       // such as append, assign
    
    template <class InputIterator>
      return-type F(const_iterator i1, const_iterator i2,
                    InputIterator first, InputIterator last);       // such as replace
    

    are called with a type InputIterator that does not qualify as an input iterator, then these functions shall not participate in overload resolution.

  • A deduction guide for a sequence container shall not participate in overload resolution if it has an InputIterator template parameter and a type that does not qualify as an input iterator is deduced for that parameter, or if it has an Allocator template parameter and a type that does not qualify as an allocator is deduced for that parameter.

Table 88 lists operations that are provided for some types of sequence containers but not others. An implementation shall provide these operations for all container types shown in the “container” column, and shall implement them so as to take amortized constant time.

Table 88 — Optional sequence container operations
ExpressionReturn typeOperational semanticsContainer
a.front() reference; const_­reference for constant a *a.begin() basic_­string, array, deque, forward_­list, list, vector
a.back() reference; const_­reference for constant a { auto tmp = a.end();
--tmp;
return *tmp; }
basic_­string, array, deque, list, vector
a.emplace_­front(args) reference Prepends an object of type T constructed with std​::​forward<​Args​>(​args)....
Requires:  T shall be EmplaceConstructible into X from args.
Returns: a.front().
deque, forward_­list, list
a.emplace_­back(args) reference Appends an object of type T constructed with std​::​forward<​Args​>(​args)....
Requires:  T shall be EmplaceConstructible into X from args. For vector, T shall also be MoveInsertable into X.
Returns: a.back().
deque, list, vector
a.push_­front(t) void Prepends a copy of t.
Requires:  T shall be CopyInsertable into X.
deque, forward_­list, list
a.push_­front(rv) void Prepends a copy of rv.
Requires:  T shall be MoveInsertable into X.
deque, forward_­list, list
a.push_­back(t) void Appends a copy of t.
Requires:  T shall be CopyInsertable into X.
basic_­string, deque, list, vector
a.push_­back(rv) void Appends a copy of rv.
Requires:  T shall be MoveInsertable into X.
basic_­string, deque, list, vector
a.pop_­front() void Destroys the first element.
Requires:  a.empty() shall be false.
deque, forward_­list, list
a.pop_­back() void Destroys the last element.
Requires:  a.empty() shall be false.
basic_­string, deque, list, vector
a[n] reference; const_­reference for constant a *(a.begin() + n) basic_­string, array, deque, vector
a.at(n) reference; const_­reference for constant a *(a.begin() + n) basic_­string, array, deque, vector

The member function at() provides bounds-checked access to container elements. at() throws out_­of_­range if n >= a.size().

26.2.4 Node handles [container.node]

26.2.4.1 node_­handle overview [container.node.overview]

A node handle is an object that accepts ownership of a single element from an associative container or an unordered associative container. It may be used to transfer that ownership to another container with compatible nodes. Containers with compatible nodes have the same node handle type. Elements may be transferred in either direction between container types in the same row of Table 89.

Table 89 — Container types with compatible nodes
map<K, T, C1, A> map<K, T, C2, A>
map<K, T, C1, A> multimap<K, T, C2, A>
set<K, C1, A> set<K, C2, A>
set<K, C1, A> multiset<K, C2, A>
unordered_­map<K, T, H1, E1, A> unordered_­map<K, T, H2, E2, A>
unordered_­map<K, T, H1, E1, A> unordered_­multimap<K, T, H2, E2, A>
unordered_­set<K, H1, E1, A> unordered_­set<K, H2, E2, A>
unordered_­set<K, H1, E1, A> unordered_­multiset<K, H2, E2, A>

If a node handle is not empty, then it contains an allocator that is equal to the allocator of the container when the element was extracted. If a node handle is empty, it contains no allocator.

Class node_­handle is for exposition only. An implementation is permitted to provide equivalent functionality without providing a class with this name.

If a user-defined specialization of pair exists for pair<const Key, T> or pair<Key, T>, where Key is the container's key_­type and T is the container's mapped_­type, the behavior of operations involving node handles is undefined.

template<unspecified>
  class node_handle {
  public:
    // These type declarations are described in Tables 90 and 91.
    using value_type     = see below;   // not present for map containers
    using key_type       = see below;   // not present for set containers
    using mapped_type    = see below;   // not present for set containers
    using allocator_type = see below;

  private:
    using container_node_type = unspecified;
    using ator_traits = allocator_traits<allocator_type>;

    typename ator_traits::rebind_traits<container_node_type>::pointer ptr_;
    optional<allocator_type> alloc_;

  public:
    constexpr node_handle() noexcept : ptr_(), alloc_() {}
    ~node_handle();
    node_handle(node_handle&&) noexcept;
    node_handle& operator=(node_handle&&);

    value_type& value() const;          // not present for map containers
    key_type& key() const;              // not present for set containers
    mapped_type& mapped() const;        // not present for set containers

    allocator_type get_allocator() const;
    explicit operator bool() const noexcept;
    bool empty() const noexcept;

    void swap(node_handle&)
      noexcept(ator_traits::propagate_on_container_swap::value ||
               ator_traits::is_always_equal::value);

    friend void swap(node_handle& x, node_handle& y) noexcept(noexcept(x.swap(y))) {
      x.swap(y);
    }
};

26.2.4.2 node_­handle constructors, copy, and assignment [container.node.cons]

node_handle(node_handle&& nh) noexcept;

Effects: Constructs a node_­handle object initializing ptr_­ with nh.ptr_­. Move constructs alloc_­ with nh.alloc_­. Assigns nullptr to nh.ptr_­ and assigns nullopt to nh.alloc_­.

node_handle& operator=(node_handle&& nh);

Requires: Either !alloc_­, or ator_­traits​::​propagate_­on_­container_­move_­assignment is true, or alloc_­ == nh.alloc_­.

Effects:

  • If ptr_­ != nullptr, destroys the value_­type subobject in the container_­node_­type object pointed to by ptr_­ by calling ator_­traits​::​destroy, then deallocates ptr_­ by calling ator_­traits​::​rebind_­traits<container_­node_­type>​::​deallocate.

  • Assigns nh.ptr_­ to ptr_­.

  • If !alloc_ or ator_­traits​::​propagate_­on_­container_­move_­assignment is true, move assigns nh.alloc_­ to alloc_­.

  • Assigns nullptr to nh.ptr_­ and assigns nullopt to nh.alloc_­.

Returns: *this.

Throws: Nothing.

26.2.4.3 node_­handle destructor [container.node.dtor]

~node_handle();

Effects: If ptr_­ != nullptr, destroys the value_­type subobject in the container_­node_­type object pointed to by ptr_­ by calling ator_­traits​::​destroy, then deallocates ptr_­ by calling ator_­traits​::​rebind_­traits<container_­node_­type>​::​deallocate.

26.2.4.4 node_­handle observers [container.node.observers]

value_type& value() const;

Requires: empty() == false.

Returns: A reference to the value_­type subobject in the container_­node_­type object pointed to by ptr_­.

Throws: Nothing.

key_type& key() const;

Requires: empty() == false.

Returns: A non-const reference to the key_­type member of the value_­type subobject in the container_­node_­type object pointed to by ptr_­.

Throws: Nothing.

Remarks: Modifying the key through the returned reference is permitted.

mapped_type& mapped() const;

Requires: empty() == false.

Returns: A reference to the mapped_­type member of the value_­type subobject in the container_­node_­type object pointed to by ptr_­.

Throws: Nothing.

allocator_type get_allocator() const;

Requires: empty() == false.

Returns: *alloc_­.

Throws: Nothing.

explicit operator bool() const noexcept;

Returns: ptr_­ != nullptr.

bool empty() const noexcept;

Returns: ptr_­ == nullptr.

26.2.4.5 node_­handle modifiers [container.node.modifiers]

void swap(node_handle& nh) noexcept(ator_traits::propagate_on_container_swap::value || ator_traits::is_always_equal::value);

Requires: !alloc_­, or !nh.alloc_­, or ator_­traits​::​propagate_­on_­container_­swap is true, or alloc_­ == nh.alloc_­.

Effects: Calls swap(ptr_­, nh.ptr_­). If !alloc_­, or !nh.alloc_­, or ator_­traits​::​propagate_­on_­container_­swap is true calls swap(alloc_­, nh.alloc_­).

26.2.5 Insert return type [container.insert.return]

The associative containers with unique keys and the unordered containers with unique keys have a member function insert that returns a nested type insert_­return_­type. That return type is a specialization of the type specified in this subclause.

template <class Iterator, class NodeType>
struct INSERT_RETURN_TYPE
{
  Iterator position;
  bool     inserted;
  NodeType node;
};

The name INSERT_­RETURN_­TYPE is exposition only. INSERT_­RETURN_­TYPE has the template parameters, data members, and special members specified above. It has no base classes or members other than those specified.

26.2.6 Associative containers [associative.reqmts]

Associative containers provide fast retrieval of data based on keys. The library provides four basic kinds of associative containers: set, multiset, map and multimap.

Each associative container is parameterized on Key and an ordering relation Compare that induces a strict weak ordering on elements of Key. In addition, map and multimap associate an arbitrary mapped type T with the Key. The object of type Compare is called the comparison object of a container.

The phrase “equivalence of keys” means the equivalence relation imposed by the comparison and not the operator== on keys. That is, two keys k1 and k2 are considered to be equivalent if for the comparison object comp, comp(k1, k2) == false && comp(k2, k1) == false. For any two keys k1 and k2 in the same container, calling comp(k1, k2) shall always return the same value.

An associative container supports unique keys if it may contain at most one element for each key. Otherwise, it supports equivalent keys. The set and map classes support unique keys; the multiset and multimap classes support equivalent keys. For multiset and multimap, insert, emplace, and erase preserve the relative ordering of equivalent elements.

For set and multiset the value type is the same as the key type. For map and multimap it is equal to pair<const Key, T>.

iterator of an associative container is of the bidirectional iterator category. For associative containers where the value type is the same as the key type, both iterator and const_­iterator are constant iterators. It is unspecified whether or not iterator and const_­iterator are the same type. [Note: iterator and const_­iterator have identical semantics in this case, and iterator is convertible to const_­iterator. Users can avoid violating the one-definition rule by always using const_­iterator in their function parameter lists. end note]

The associative containers meet all the requirements of Allocator-aware containers, except that for map and multimap, the requirements placed on value_­type in Table 83 apply instead to key_­type and mapped_­type. [Note: For example, in some cases key_­type and mapped_­type are required to be CopyAssignable even though the associated value_­type, pair<const key_­type, mapped_­type>, is not CopyAssignable. end note]

In Table 90, X denotes an associative container class, a denotes a value of type X, a2 denotes a value of a type with nodes compatible with type X (Table 89), b denotes a possibly const value of type X, u denotes the name of a variable being declared, a_­uniq denotes a value of type X when X supports unique keys, a_­eq denotes a value of type X when X supports multiple keys, a_­tran denotes a possibly const value of type X when the qualified-id X​::​key_­compare​::​is_­transparent is valid and denotes a type ([temp.deduct]), i and j satisfy input iterator requirements and refer to elements implicitly convertible to value_­type, [i, j) denotes a valid range, p denotes a valid constant iterator to a, q denotes a valid dereferenceable constant iterator to a, r denotes a valid dereferenceable iterator to a, [q1, q2) denotes a valid range of constant iterators in a, il designates an object of type initializer_­list<value_­type>, t denotes a value of type X​::​value_­type, k denotes a value of type X​::​key_­type and c denotes a possibly const value of type X​::​key_­compare; kl is a value such that a is partitioned with respect to c(r, kl), with r the key value of e and e in a; ku is a value such that a is partitioned with respect to !c(ku, r); ke is a value such that a is partitioned with respect to c(r, ke) and !c(ke, r), with c(r, ke) implying !c(ke, r). A denotes the storage allocator used by X, if any, or allocator<X​::​value_­type> otherwise, m denotes an allocator of a type convertible to A, and nh denotes a non-const rvalue of type X​::​node_­type.

Table 90 — Associative container requirements (in addition to container)
ExpressionReturn typeAssertion/noteComplexity
pre-/post-condition
X​::​key_­type Key compile time
X​::​mapped_­type (map and multimap only) T compile time
X​::​value_­type (set and multiset only) Key Requires:  value_­type is Erasable from X compile time
X​::​value_­type (map and multimap only) pair<const Key, T> Requires:  value_­type is Erasable from X compile time
X​::​key_­compare Compare Requires:  key_­compare is CopyConstructible. compile time
X​::​value_­compare a binary predicate type is the same as key_­compare for set and multiset; is an ordering relation on pairs induced by the first component (i.e., Key) for map and multimap. compile time
X​::​node_­type a specialization of a node_­handle class template, such that the public nested types are the same types as the corresponding types in X. see [container.node] compile time
X(c)
X u(c);
Effects:  Constructs an empty container. Uses a copy of c as a comparison object. constant
X()
X u;
Requires:  key_­compare is DefaultConstructible.
Effects:  Constructs an empty container. Uses Compare() as a comparison object
constant
X(i,j,c)
X u(i,j,c);
Requires:  value_­type is EmplaceConstructible into X from *i.
Effects:  Constructs an empty container and inserts elements from the range [i, j) into it; uses c as a comparison object.
NlogN in general, where N has the value distance(i, j); linear if [i, j) is sorted with value_­comp()
X(i,j)
X u(i,j);
Requires:  key_­compare is DefaultConstructible. value_­type is EmplaceConstructible into X from *i.
Effects:  Same as above, but uses Compare() as a comparison object.
same as above
X(il) same as X(il.begin(), il.end()) same as X(il.begin(), il.end())
X(il,c) same as X(il.begin(), il.end(), c) same as X(il.begin(), il.end(), c)
a = il X& Requires:  value_­type is CopyInsertable into X and CopyAssignable.
Effects: Assigns the range [il.begin(), il.end()) into a. All existing elements of a are either assigned to or destroyed.
NlogN in general, where N has the value il.size() + a.size(); linear if [il.begin(), il.end()) is sorted with value_­comp()
b.key_­comp() X​::​key_­compare returns the comparison object out of which b was constructed. constant
b.value_­comp() X​::​value_­compare returns an object of value_­compare constructed out of the comparison object constant
a_­uniq.​emplace(​args) pair<​iterator, bool> Requires:  value_­type shall be EmplaceConstructible into X from args.
Effects:  Inserts a value_­type object t constructed with std​::​forward<​Args​>(​args)... if and only if there is no element in the container with key equivalent to the key of t. The bool component of the returned pair is true if and only if the insertion takes place, and the iterator component of the pair points to the element with key equivalent to the key of t.
logarithmic
a_­eq.​emplace(​args) iterator Requires:  value_­type shall be EmplaceConstructible into X from args.
Effects:  Inserts a value_­type object t constructed with std​::​forward<​Args​>(​args)... and returns the iterator pointing to the newly inserted element. If a range containing elements equivalent to t exists in a_­eq, t is inserted at the end of that range.
logarithmic
a.emplace_­hint(​p, args) iterator equivalent to a.emplace( std​::​forward<​Args​>(​args)...). Return value is an iterator pointing to the element with the key equivalent to the newly inserted element. The element is inserted as close as possible to the position just prior to p. logarithmic in general, but amortized constant if the element is inserted right before p
a_­uniq.​insert(​t) pair<​iterator, bool> Requires:  If t is a non-const rvalue expression, value_­type shall be MoveInsertable into X; otherwise, value_­type shall be CopyInsertable into X.
Effects:  Inserts t if and only if there is no element in the container with key equivalent to the key of t. The bool component of the returned pair is true if and only if the insertion takes place, and the iterator component of the pair points to the element with key equivalent to the key of t.
logarithmic
a_­eq.​insert(​t) iterator Requires:  If t is a non-const rvalue expression, value_­type shall be MoveInsertable into X; otherwise, value_­type shall be CopyInsertable into X.
Effects:  Inserts t and returns the iterator pointing to the newly inserted element. If a range containing elements equivalent to t exists in a_­eq, t is inserted at the end of that range.
logarithmic
a.​insert(​p, t) iterator Requires:  If t is a non-const rvalue expression, value_­type shall be MoveInsertable into X; otherwise, value_­type shall be CopyInsertable into X.
Effects:  Inserts t if and only if there is no element with key equivalent to the key of t in containers with unique keys; always inserts t in containers with equivalent keys. Always returns the iterator pointing to the element with key equivalent to the key of t. t is inserted as close as possible to the position just prior to p.
logarithmic in general, but amortized constant if t is inserted right before p.
a.​insert(​i, j) void Requires:  value_­type shall be EmplaceConstructible into X from *i.
Requires: i, j are not iterators into a. inserts each element from the range [i, j) if and only if there is no element with key equivalent to the key of that element in containers with unique keys; always inserts that element in containers with equivalent keys.
Nlog(a.size()+N), where N has the value distance(i, j)
a.​insert(​il) void equivalent to a.insert(il.begin(), il.end())
a_­uniq.​insert(​nh) insert_­return_­type Requires: nh is empty or a_­uniq.get_­allocator() == nh.get_­allocator().
Effects: If nh is empty, has no effect. Otherwise, inserts the element owned by nh if and only if there is no element in the container with a key equivalent to nh.key().
Postconditions: If nh is empty, inserted is false, position is end(), and node is empty. Otherwise if the insertion took place, inserted is true, position points to the inserted element, and node is empty; if the insertion failed, inserted is false, node has the previous value of nh, and position points to an element with a key equivalent to nh.key().
logarithmic
a_­eq.​insert(​nh) iterator Requires: nh is empty or a_­eq.get_­allocator() == nh.get_­allocator().
Effects: If nh is empty, has no effect and returns a_­eq.end(). Otherwise, inserts the element owned by nh and returns an iterator pointing to the newly inserted element. If a range containing elements with keys equivalent to nh.key() exists in a_­eq, the element is inserted at the end of that range.
Postconditions: nh is empty.
logarithmic
a.​insert(​p, nh) iterator Requires: nh is empty or a.get_­allocator() == nh.get_­allocator().
Effects: If nh is empty, has no effect and returns a.end(). Otherwise, inserts the element owned by nh if and only if there is no element with key equivalent to nh.key() in containers with unique keys; always inserts the element owned by nh in containers with equivalent keys. Always returns the iterator pointing to the element with key equivalent to nh.key(). The element is inserted as close as possible to the position just prior to p.
Postconditions: nh is empty if insertion succeeds, unchanged if insertion fails.
logarithmic in general, but amortized constant if the element is inserted right before p.
a.​extract(​k) node_­type removes the first element in the container with key equivalent to k. Returns a node_­type owning the element if found, otherwise an empty node_­type. log(a.size())
a.​extract(​q) node_­type removes the element pointed to by q. Returns a node_­type owning that element. amortized constant
a.merge(a2) void Requires: a.get_­allocator() == a2.get_­allocator().
Attempts to extract each element in a2 and insert it into a using the comparison object of a. In containers with unique keys, if there is an element in a with key equivalent to the key of an element from a2, then that element is not extracted from a2.
Postconditions: Pointers and references to the transferred elements of a2 refer to those same elements but as members of a. Iterators referring to the transferred elements will continue to refer to their elements, but they now behave as iterators into a, not into a2.
Throws: Nothing unless the comparison object throws.
Nlog(a.size()+N), where N has the value a2.size().
a.erase(k) size_­type erases all elements in the container with key equivalent to k. returns the number of erased elements. log(a.size())+a.count(k)
a.erase(q) iterator erases the element pointed to by q. Returns an iterator pointing to the element immediately following q prior to the element being erased. If no such element exists, returns a.end(). amortized constant
a.erase(r) iterator erases the element pointed to by r. Returns an iterator pointing to the element immediately following r prior to the element being erased. If no such element exists, returns a.end(). amortized constant
a.erase(
q1, q2)
iterator erases all the elements in the range [q1, q2). Returns an iterator pointing to the element pointed to by q2 prior to any elements being erased. If no such element exists, a.end() is returned. log(a.size())+N, where N has the value distance(q1, q2).
a.clear() void a.erase(a.begin(),a.end())
Postconditions: a.empty() returns true.
linear in a.size().
b.find(k) iterator; const_­iterator for constant b. returns an iterator pointing to an element with the key equivalent to k, or b.end() if such an element is not found logarithmic
a_­tran.
find(ke)
iterator; const_­iterator for constant a_­tran. returns an iterator pointing to an element with key r such that !c(r, ke) && !c(ke, r), or a_­tran.end() if such an element is not found logarithmic
b.count(k) size_­type returns the number of elements with key equivalent to k log(b.size())+b.count(k)
a_­tran.
count(ke)
size_­type returns the number of elements with key r such that !c(r, ke) && !c(ke, r) log(a_tran.size())+a_tran.count(ke)
b.lower_­bound(k) iterator; const_­iterator for constant b. returns an iterator pointing to the first element with key not less than k, or b.end() if such an element is not found. logarithmic
a_­tran.
lower_­bound(kl)
iterator; const_­iterator for constant a_­tran. returns an iterator pointing to the first element with key r such that !c(r, kl), or a_­tran.end() if such an element is not found. logarithmic
b.upper_­bound(k) iterator; const_­iterator for constant b. returns an iterator pointing to the first element with key greater than k, or b.end() if such an element is not found. logarithmic
a_­tran.
upper_­bound(ku)
iterator; const_­iterator for constant a_­tran. returns an iterator pointing to the first element with key r such that c(ku, r), or a_­tran.end() if such an element is not found. logarithmic
b.equal_­range(k) pair<​iterator, iterator>; pair<​const_­iterator, const_­iterator> for constant b. equivalent to make_­pair(b.lower_­bound(k), b.upper_­bound(k)). logarithmic
a_­tran.
equal_­range(ke)
pair<​iterator, iterator>; pair<​const_­iterator, const_­iterator> for constant a_­tran. equivalent to make_­pair(
a_­tran.lower_­bound(ke), a_­tran.upper_­bound(ke)).
logarithmic

The insert and emplace members shall not affect the validity of iterators and references to the container, and the erase members shall invalidate only iterators and references to the erased elements.

The extract members invalidate only iterators to the removed element; pointers and references to the removed element remain valid. However, accessing the element through such pointers and references while the element is owned by a node_­type is undefined behavior. References and pointers to an element obtained while it is owned by a node_­type are invalidated if the element is successfully inserted.

The fundamental property of iterators of associative containers is that they iterate through the containers in the non-descending order of keys where non-descending is defined by the comparison that was used to construct them. For any two dereferenceable iterators i and j such that distance from i to j is positive, the following condition holds:

value_comp(*j, *i) == false

For associative containers with unique keys the stronger condition holds:

value_comp(*i, *j) != false

When an associative container is constructed by passing a comparison object the container shall not store a pointer or reference to the passed object, even if that object is passed by reference. When an associative container is copied, either through a copy constructor or an assignment operator, the target container shall then use the comparison object from the container being copied, as if that comparison object had been passed to the target container in its constructor.

The member function templates find, count, lower_­bound, upper_­bound, and equal_­range shall not participate in overload resolution unless the qualified-id Compare​::​is_­transparent is valid and denotes a type ([temp.deduct]).

A deduction guide for an associative container shall not participate in overload resolution if any of the following are true:

  • It has an InputIterator template parameter and a type that does not qualify as an input iterator is deduced for that parameter.

  • It has an Allocator template parameter and a type that does not qualify as an allocator is deduced for that parameter.

  • It has a Compare template parameter and a type that qualifies as an allocator is deduced for that parameter.

26.2.6.1 Exception safety guarantees [associative.reqmts.except]

For associative containers, no clear() function throws an exception. erase(k) does not throw an exception unless that exception is thrown by the container's Compare object (if any).

For associative containers, if an exception is thrown by any operation from within an insert or emplace function inserting a single element, the insertion has no effect.

For associative containers, no swap function throws an exception unless that exception is thrown by the swap of the container's Compare object (if any).

26.2.7 Unordered associative containers [unord.req]

Unordered associative containers provide an ability for fast retrieval of data based on keys. The worst-case complexity for most operations is linear, but the average case is much faster. The library provides four unordered associative containers: unordered_­set, unordered_­map, unordered_­multiset, and unordered_­multimap.

Unordered associative containers conform to the requirements for Containers, except that the expressions a == b and a != b have different semantics than for the other container types.

Each unordered associative container is parameterized by Key, by a function object type Hash that meets the Hash requirements and acts as a hash function for argument values of type Key, and by a binary predicate Pred that induces an equivalence relation on values of type Key. Additionally, unordered_­map and unordered_­multimap associate an arbitrary mapped type T with the Key.

The container's object of type Hash — denoted by hash — is called the hash function of the container. The container's object of type Pred — denoted by pred — is called the key equality predicate of the container.

Two values k1 and k2 of type Key are considered equivalent if the container's key equality predicate returns true when passed those values. If k1 and k2 are equivalent, the container's hash function shall return the same value for both. [Note: Thus, when an unordered associative container is instantiated with a non-default Pred parameter it usually needs a non-default Hash parameter as well. end note] For any two keys k1 and k2 in the same container, calling pred(k1, k2) shall always return the same value. For any key k in a container, calling hash(k) shall always return the same value.

An unordered associative container supports unique keys if it may contain at most one element for each key. Otherwise, it supports equivalent keys. unordered_­set and unordered_­map support unique keys. unordered_­multiset and unordered_­multimap support equivalent keys. In containers that support equivalent keys, elements with equivalent keys are adjacent to each other in the iteration order of the container. Thus, although the absolute order of elements in an unordered container is not specified, its elements are grouped into equivalent-key groups such that all elements of each group have equivalent keys. Mutating operations on unordered containers shall preserve the relative order of elements within each equivalent-key group unless otherwise specified.

For unordered_­set and unordered_­multiset the value type is the same as the key type. For unordered_­map and unordered_­multimap it is pair<const Key, T>.

For unordered containers where the value type is the same as the key type, both iterator and const_­iterator are constant iterators. It is unspecified whether or not iterator and const_­iterator are the same type. [Note: iterator and const_­iterator have identical semantics in this case, and iterator is convertible to const_­iterator. Users can avoid violating the one-definition rule by always using const_­iterator in their function parameter lists. end note]

The elements of an unordered associative container are organized into buckets. Keys with the same hash code appear in the same bucket. The number of buckets is automatically increased as elements are added to an unordered associative container, so that the average number of elements per bucket is kept below a bound. Rehashing invalidates iterators, changes ordering between elements, and changes which buckets elements appear in, but does not invalidate pointers or references to elements. For unordered_­multiset and unordered_­multimap, rehashing preserves the relative ordering of equivalent elements.

The unordered associative containers meet all the requirements of Allocator-aware containers, except that for unordered_­map and unordered_­multimap, the requirements placed on value_­type in Table 83 apply instead to key_­type and mapped_­type. [Note: For example, key_­type and mapped_­type are sometimes required to be CopyAssignable even though the associated value_­type, pair<const key_­type, mapped_­type>, is not CopyAssignable. end note]

In Table 91: X denotes an unordered associative container class, a denotes a value of type X, a2 denotes a value of a type with nodes compatible with type X (Table 89), b denotes a possibly const value of type X, a_­uniq denotes a value of type X when X supports unique keys, a_­eq denotes a value of type X when X supports equivalent keys, i and j denote input iterators that refer to value_­type, [i, j) denotes a valid range, p and q2 denote valid constant iterators to a, q and q1 denote valid dereferenceable constant iterators to a, r denotes a valid dereferenceable iterator to a, [q1, q2) denotes a valid range in a, il denotes a value of type initializer_­list<value_­type>, t denotes a value of type X​::​value_­type, k denotes a value of type key_­type, hf denotes a possibly const value of type hasher, eq denotes a possibly const value of type key_­equal, n denotes a value of type size_­type, z denotes a value of type float, and nh denotes a non-const rvalue of type X​::​node_­type.

Table 91 — Unordered associative container requirements (in addition to container)
ExpressionReturn typeAssertion/noteComplexity
pre-/post-condition
X​::​key_­type Key compile time
X​::​mapped_­type (unordered_­map and unordered_­multimap only) T compile time
X​::​value_­type (unordered_­set and unordered_­multiset only) Key Requires:  value_­type is Erasable from X compile time
X​::​value_­type (unordered_­map and unordered_­multimap only) pair<const Key, T> Requires:  value_­type is Erasable from X compile time
X​::​hasher Hash Hash shall be a unary function object type such that the expression hf(k) has type size_­t. compile time
X​::​key_­equal Pred Requires:  Pred is CopyConstructible.
Pred shall be a binary predicate that takes two arguments of type Key. Pred is an equivalence relation.
compile time
X​::​local_­iterator An iterator type whose category, value type, difference type, and pointer and reference types are the same as X​::​iterator's. A local_­iterator object may be used to iterate through a single bucket, but may not be used to iterate across buckets. compile time
X​::​const_­local_­iterator An iterator type whose category, value type, difference type, and pointer and reference types are the same as X​::​const_­iterator's. A const_­local_­iterator object may be used to iterate through a single bucket, but may not be used to iterate across buckets. compile time
X​::​node_­type a specialization of a node_­handle class template, such that the public nested types are the same types as the corresponding types in X. see [container.node] compile time
X(n, hf, eq)
X a(n, hf, eq);
X Effects:  Constructs an empty container with at least n buckets, using hf as the hash function and eq as the key equality predicate. O(n)
X(n, hf)
X a(n, hf);
X Requires:  key_­equal is DefaultConstructible.
Effects:  Constructs an empty container with at least n buckets, using hf as the hash function and key_­equal() as the key equality predicate.
O(n)
X(n)
X a(n);
X Requires:  hasher and key_­equal are DefaultConstructible.
Effects:  Constructs an empty container with at least n buckets, using hasher() as the hash function and key_­equal() as the key equality predicate.
O(n)
X()
X a;
X Requires:  hasher and key_­equal are DefaultConstructible.
Effects:  Constructs an empty container with an unspecified number of buckets, using hasher() as the hash function and key_­equal() as the key equality predicate.
constant
X(i, j, n, hf, eq)
X a(i, j, n, hf, eq);
X Requires:  value_­type is EmplaceConstructible into X from *i.
Effects:  Constructs an empty container with at least n buckets, using hf as the hash function and eq as the key equality predicate, and inserts elements from [i, j) into it.
Average case O(N) (N is distance(i, j)), worst case O(N2)
X(i, j, n, hf)
X a(i, j, n, hf);
X Requires:  key_­equal is DefaultConstructible. value_­type is EmplaceConstructible into X from *i.
Effects:  Constructs an empty container with at least n buckets, using hf as the hash function and key_­equal() as the key equality predicate, and inserts elements from [i, j) into it.
Average case O(N) (N is distance(i, j)), worst case O(N2)
X(i, j, n)
X a(i, j, n);
X Requires:  hasher and key_­equal are DefaultConstructible. value_­type is EmplaceConstructible into X from *i.
Effects:  Constructs an empty container with at least n buckets, using hasher() as the hash function and key_­equal() as the key equality predicate, and inserts elements from [i, j) into it.
Average case O(N) (N is distance(i, j)), worst case O(N2)
X(i, j)
X a(i, j);
X Requires:  hasher and key_­equal are DefaultConstructible. value_­type is EmplaceConstructible into X from *i.
Effects:  Constructs an empty container with an unspecified number of buckets, using hasher() as the hash function and key_­equal() as the key equality predicate, and inserts elements from [i, j) into it.
Average case O(N) (N is distance(i, j)), worst case O(N2)
X(il) X Same as X(il.begin(), il.end()). Same as X(il.begin(), il.end()).
X(il, n) X Same as X(il.begin(), il.end(), n). Same as X(il.begin(), il.end(), n).
X(il, n, hf) X Same as X(il.begin(), il.end(), n, hf). Same as X(il.begin(), il.end(), n, hf).
X(il, n, hf, eq) X Same as X(il.begin(), il.end(), n, hf, eq). Same as X(il.begin(), il.end(), n, hf, eq).
X(b)
X a(b);
X Copy constructor. In addition to the requirements of Table 83, copies the hash function, predicate, and maximum load factor. Average case linear in b.size(), worst case quadratic.
a = b X& Copy assignment operator. In addition to the requirements of Table 83, copies the hash function, predicate, and maximum load factor. Average case linear in b.size(), worst case quadratic.
a = il X& Requires:  value_­type is CopyInsertable into X and CopyAssignable.
Effects:  Assigns the range [il.begin(), il.end()) into a. All existing elements of a are either assigned to or destroyed.
Same as a = X(il).
b.hash_­function() hasher Returns b's hash function. constant
b.key_­eq() key_­equal Returns b's key equality predicate. constant
a_­uniq. emplace(args) pair<iterator, bool> Requires:  value_­type shall be EmplaceConstructible into X from args.
Effects:  Inserts a value_­type object t constructed with std​::​forward<​Args​>(​args)... if and only if there is no element in the container with key equivalent to the key of t. The bool component of the returned pair is true if and only if the insertion takes place, and the iterator component of the pair points to the element with key equivalent to the key of t.
Average case O(1), worst case O(a_uniq.size()).
a_­eq.emplace(args) iterator Requires:  value_­type shall be EmplaceConstructible into X from args.
Effects:  Inserts a value_­type object t constructed with std​::​forward<​Args>(​args)... and returns the iterator pointing to the newly inserted element.
Average case O(1), worst case O(a_eq.size()).
a.emplace_­hint(p, args) iterator Requires:  value_­type shall be EmplaceConstructible into X from args.
Effects:  Equivalent to a.emplace( std​::​forward<​Args>(​args)...). Return value is an iterator pointing to the element with the key equivalent to the newly inserted element. The const_­iterator p is a hint pointing to where the search should start. Implementations are permitted to ignore the hint.
Average case O(1), worst case O(a.size()).
a_­uniq.insert(t) pair<iterator, bool> Requires:  If t is a non-const rvalue expression, value_­type shall be MoveInsertable into X; otherwise, value_­type shall be CopyInsertable into X.
Effects:  Inserts t if and only if there is no element in the container with key equivalent to the key of t. The bool component of the returned pair indicates whether the insertion takes place, and the iterator component points to the element with key equivalent to the key of t.
Average case O(1), worst case O(a_uniq.size()).
a_­eq.insert(t) iterator Requires:  If t is a non-const rvalue expression, value_­type shall be MoveInsertable into X; otherwise, value_­type shall be CopyInsertable into X.
Effects:  Inserts t, and returns an iterator pointing to the newly inserted element.
Average case O(1), worst case O(a_eq.size()).
a.insert(p, t) iterator Requires:  If t is a non-const rvalue expression, value_­type shall be MoveInsertable into X; otherwise, value_­type shall be CopyInsertable into X.
Effects:  Equivalent to a.insert(t). Return value is an iterator pointing to the element with the key equivalent to that of t. The iterator p is a hint pointing to where the search should start. Implementations are permitted to ignore the hint.
Average case O(1), worst case O(a.size()).
a.insert(i, j) void Requires:  value_­type shall be EmplaceConstructible into X from *i.
Requires: i and j are not iterators in a. Equivalent to a.insert(t) for each element in [i,j).
Average case O(N), where N is distance(i, j). Worst case O(N(a.size()+1)).
a.insert(il) void Same as a.insert(il.begin(), il.end()). Same as a.insert( il.begin(), il.end()).
a_­uniq.
insert(nh)
insert_­return_­type Requires: nh is empty or a_­uniq.get_­allocator() == nh.get_­allocator().
Effects: If nh is empty, has no effect. Otherwise, inserts the element owned by nh if and only if there is no element in the container with a key equivalent to nh.key().
Postconditions: If nh is empty, inserted is false, position is end(), and node is empty. Otherwise if the insertion took place, inserted is true, position points to the inserted element, and node is empty; if the insertion failed, inserted is false, node has the previous value of nh, and position points to an element with a key equivalent to nh.key().
Average case O(1), worst case O(a_uniq.size()).
a_­eq.
insert(nh)
iterator Requires: nh is empty or a_­eq.get_­allocator() == nh.get_­allocator().
Effects: If nh is empty, has no effect and returns a_­eq.end(). Otherwise, inserts the element owned by nh and returns an iterator pointing to the newly inserted element.
Postconditions: nh is empty.
Average case O(1), worst case O(a_eq.size()).
a.insert(q, nh) iterator Requires: nh is empty or a.get_­allocator() == nh.get_­allocator().
Effects: If nh is empty, has no effect and returns a.end(). Otherwise, inserts the element owned by nh if and only if there is no element with key equivalent to nh.key() in containers with unique keys; always inserts the element owned by nh in containers with equivalent keys. Always returns the iterator pointing to the element with key equivalent to nh.key(). The iterator q is a hint pointing to where the search should start. Implementations are permitted to ignore the hint.
Postconditions: nh is empty if insertion succeeds, unchanged if insertion fails.
Average case O(1), worst case O(a.size()).
a.extract(k) node_­type Removes an element in the container with key equivalent to k. Returns a node_­type owning the element if found, otherwise an empty node_­type. Average case O(1), worst case O(a.size()).
a.extract(q) node_­type Removes the element pointed to by q. Returns a node_­type owning that element. Average case O(1), worst case O(a.size()).
a.merge(a2) void Requires: a.get_­allocator() == a2.get_­allocator().
Attempts to extract each element in a2 and insert it into a using the hash function and key equality predicate of a. In containers with unique keys, if there is an element in a with key equivalent to the key of an element from a2, then that element is not extracted from a2. Postconditions: Pointers and references to the transferred elements of a2 refer to those same elements but as members of a. Iterators referring to the transferred elements and all iterators referring to a will be invalidated, but iterators to elements remaining in a2 will remain valid.
Throws: Nothing unless the hash function or key equality predicate throws.
Average case O(N), where N is a2.size(). Worst case O(N*a.size()+N).
a.erase(k) size_­type Erases all elements with key equivalent to k. Returns the number of elements erased. Average case O(a.count(k)). Worst case O(a.size()).
a.erase(q) iterator Erases the element pointed to by q. Returns the iterator immediately following q prior to the erasure. Average case O(1), worst case O(a.size()).
a.erase(r) iterator Erases the element pointed to by r. Returns the iterator immediately following r prior to the erasure. Average case O(1), worst case O(a.size()).
a.erase(q1, q2) iterator Erases all elements in the range [q1, q2). Returns the iterator immediately following the erased elements prior to the erasure. Average case linear in distance(q1, q2), worst case O(a.size()).
a.clear() void Erases all elements in the container. Postconditions: a.empty() returns true Linear in a.size().
b.find(k) iterator;
const_­iterator for const b.
Returns an iterator pointing to an element with key equivalent to k, or b.end() if no such element exists. Average case O(1), worst case O(b.size()).
b.count(k) size_­type Returns the number of elements with key equivalent to k. Average case O(b.count(k)), worst case O(b.size()).
b.equal_­range(k) pair<iterator, iterator>;
pair<const_­iterator, const_­iterator> for const b.
Returns a range containing all elements with keys equivalent to k. Returns make_­pair(b.end(), b.end()) if no such elements exist. Average case O(b.count(k)). Worst case O(b.size()).
b.bucket_­count() size_­type Returns the number of buckets that b contains. Constant
b.max_­bucket_­count() size_­type Returns an upper bound on the number of buckets that b might ever contain. Constant
b.bucket(k) size_­type Requires: b.bucket_­count() > 0.
Returns the index of the bucket in which elements with keys equivalent to k would be found, if any such element existed. Postconditions: the return value shall be in the range [0, b.bucket_­count()).
Constant
b.bucket_­size(n) size_­type Requires: n shall be in the range [0, b.bucket_­count()). Returns the number of elements in the n th bucket. O(b.bucket_size(n))
b.begin(n) local_­iterator;
const_­local_­iterator for const b.
Requires: n shall be in the range [0, b.bucket_­count()). b.begin(n) returns an iterator referring to the first element in the bucket. If the bucket is empty, then b.begin(n) == b.end(n). Constant
b.end(n) local_­iterator;
const_­local_­iterator for const b.
Requires: n shall be in the range [0, b.bucket_­count()). b.end(n) returns an iterator which is the past-the-end value for the bucket. Constant
b.cbegin(n) const_­local_­iterator Requires: n shall be in the range [0, b.bucket_­count()). Note: [b.cbegin(n), b.cend(n)) is a valid range containing all of the elements in the n th bucket. Constant
b.cend(n) const_­local_­iterator Requires: n shall be in the range [0, b.bucket_­count()). Constant
b.load_­factor() float Returns the average number of elements per bucket. Constant
b.max_­load_­factor() float Returns a positive number that the container attempts to keep the load factor less than or equal to. The container automatically increases the number of buckets as necessary to keep the load factor below this number. Constant
a.max_­load_­factor(z) void Requires: z shall be positive. May change the container's maximum load factor, using z as a hint. Constant
a.rehash(n) void Postconditions: a.bucket_­count() >= a.size() / a.max_­load_­factor() and a.bucket_­count() >= n. Average case linear in a.size(), worst case quadratic.
a.reserve(n) void Same as a.rehash(ceil(n / a.max_­load_­factor())). Average case linear in a.size(), worst case quadratic.

Two unordered containers a and b compare equal if a.size() == b.size() and, for every equivalent-key group [Ea1, Ea2) obtained from a.equal_­range(Ea1), there exists an equivalent-key group [Eb1, Eb2) obtained from b.equal_­range(Ea1), such that is_­permutation(Ea1, Ea2, Eb1, Eb2) returns true. For unordered_­set and unordered_­map, the complexity of operator== (i.e., the number of calls to the == operator of the value_­type, to the predicate returned by key_­eq(), and to the hasher returned by hash_­function()) is proportional to N in the average case and to N2 in the worst case, where N is a.size(). For unordered_­multiset and unordered_­multimap, the complexity of operator== is proportional to E2i in the average case and to N2 in the worst case, where N is a.size(), and Ei is the size of the ith equivalent-key group in a. However, if the respective elements of each corresponding pair of equivalent-key groups Eai and Ebi are arranged in the same order (as is commonly the case, e.g., if a and b are unmodified copies of the same container), then the average-case complexity for unordered_­multiset and unordered_­multimap becomes proportional to N (but worst-case complexity remains O(N2), e.g., for a pathologically bad hash function). The behavior of a program that uses operator== or operator!= on unordered containers is undefined unless the Hash and Pred function objects respectively have the same behavior for both containers and the equality comparison function for Key is a refinement257 of the partition into equivalent-key groups produced by Pred.

The iterator types iterator and const_­iterator of an unordered associative container are of at least the forward iterator category. For unordered associative containers where the key type and value type are the same, both iterator and const_­iterator are constant iterators.

The insert and emplace members shall not affect the validity of references to container elements, but may invalidate all iterators to the container. The erase members shall invalidate only iterators and references to the erased elements, and preserve the relative order of the elements that are not erased.

The insert and emplace members shall not affect the validity of iterators if (N+n) <= z * B, where N is the number of elements in the container prior to the insert operation, n is the number of elements inserted, B is the container's bucket count, and z is the container's maximum load factor.

The extract members invalidate only iterators to the removed element, and preserve the relative order of the elements that are not erased; pointers and references to the removed element remain valid. However, accessing the element through such pointers and references while the element is owned by a node_­type is undefined behavior. References and pointers to an element obtained while it is owned by a node_­type are invalidated if the element is successfully inserted.

A deduction guide for an unordered associative container shall not participate in overload resolution if any of the following are true:

  • It has an InputIterator template parameter and a type that does not qualify as an input iterator is deduced for that parameter.

  • It has an Allocator template parameter and a type that does not qualify as an allocator is deduced for that parameter.

  • It has a Hash template parameter and an integral type or a type that qualifies as an allocator is deduced for that parameter.

  • It has a Pred template parameter and a type that qualifies as an allocator is deduced for that parameter.

Equality comparison is a refinement of partitioning if no two objects that compare equal fall into different partitions.

26.2.7.1 Exception safety guarantees [unord.req.except]

For unordered associative containers, no clear() function throws an exception. erase(k) does not throw an exception unless that exception is thrown by the container's Hash or Pred object (if any).

For unordered associative containers, if an exception is thrown by any operation other than the container's hash function from within an insert or emplace function inserting a single element, the insertion has no effect.

For unordered associative containers, no swap function throws an exception unless that exception is thrown by the swap of the container's Hash or Pred object (if any).

For unordered associative containers, if an exception is thrown from within a rehash() function other than by the container's hash function or comparison function, the rehash() function has no effect.