20 General utilities library [utilities]

20.11 Smart pointers [smartptr]

20.11.1 Class template unique_­ptr [unique.ptr]

20.11.1.1 General [unique.ptr.general]

1
#
A unique pointer is an object that owns another object and manages that other object through a pointer.
More precisely, a unique pointer is an object u that stores a pointer to a second object p and will dispose of p when u is itself destroyed (e.g., when leaving block scope ([stmt.dcl])).
In this context, u is said to own p.
2
#
The mechanism by which u disposes of p is known as p's associated deleter, a function object whose correct invocation results in p's appropriate disposition (typically its deletion).
3
#
Let the notation u.p denote the pointer stored by u, and let u.d denote the associated deleter.
Upon request, u can reset (replace) u.p and u.d with another pointer and deleter, but properly disposes of its owned object via the associated deleter before such replacement is considered completed.
4
#
Each object of a type U instantiated from the unique_­ptr template specified in [unique.ptr] has the strict ownership semantics, specified above, of a unique pointer.
In partial satisfaction of these semantics, each such U is Cpp17MoveConstructible and Cpp17MoveAssignable, but is not Cpp17CopyConstructible nor Cpp17CopyAssignable.
The template parameter T of unique_­ptr may be an incomplete type.
5
#
[Note 1:
The uses of unique_­ptr include providing exception safety for dynamically allocated memory, passing ownership of dynamically allocated memory to a function, and returning dynamically allocated memory from a function.
— end note]

20.11.1.2 Default deleters [unique.ptr.dltr]

20.11.1.2.1 In general [unique.ptr.dltr.general]

1
#
The class template default_­delete serves as the default deleter (destruction policy) for the class template unique_­ptr.
2
#
The template parameter T of default_­delete may be an incomplete type.

20.11.1.2.2 default_­delete [unique.ptr.dltr.dflt]

namespace std { template<class T> struct default_delete { constexpr default_delete() noexcept = default; template<class U> default_delete(const default_delete<U>&) noexcept; void operator()(T*) const; }; }
🔗
template<class U> default_delete(const default_delete<U>& other) noexcept;
1
#
Constraints: U* is implicitly convertible to T*.
2
#
Effects: Constructs a default_­delete object from another default_­delete<U> object.
🔗
void operator()(T* ptr) const;
3
#
Mandates: T is a complete type.
4
#
Effects: Calls delete on ptr.

20.11.1.2.3 default_­delete<T[]> [unique.ptr.dltr.dflt1]

namespace std { template<class T> struct default_delete<T[]> { constexpr default_delete() noexcept = default; template<class U> default_delete(const default_delete<U[]>&) noexcept; template<class U> void operator()(U* ptr) const; }; }
🔗
template<class U> default_delete(const default_delete<U[]>& other) noexcept;
1
#
Constraints: U(*)[] is convertible to T(*)[].
2
#
Effects: Constructs a default_­delete object from another default_­delete<U[]> object.
🔗
template<class U> void operator()(U* ptr) const;
3
#
Constraints: U(*)[] is convertible to T(*)[].
4
#
Mandates: U is a complete type.
5
#
Effects: Calls delete[] on ptr.

20.11.1.3 unique_­ptr for single objects [unique.ptr.single]

20.11.1.3.1 General [unique.ptr.single.general]

namespace std { template<class T, class D = default_delete<T>> class unique_ptr { public: using pointer = see below; using element_type = T; using deleter_type = D; // [unique.ptr.single.ctor], constructors constexpr unique_ptr() noexcept; explicit unique_ptr(pointer p) noexcept; unique_ptr(pointer p, see below d1) noexcept; unique_ptr(pointer p, see below d2) noexcept; unique_ptr(unique_ptr&& u) noexcept; constexpr unique_ptr(nullptr_t) noexcept; template<class U, class E> unique_ptr(unique_ptr<U, E>&& u) noexcept; // [unique.ptr.single.dtor], destructor ~unique_ptr(); // [unique.ptr.single.asgn], assignment unique_ptr& operator=(unique_ptr&& u) noexcept; template<class U, class E> unique_ptr& operator=(unique_ptr<U, E>&& u) noexcept; unique_ptr& operator=(nullptr_t) noexcept; // [unique.ptr.single.observers], observers add_lvalue_reference_t<T> operator*() const; pointer operator->() const noexcept; pointer get() const noexcept; deleter_type& get_deleter() noexcept; const deleter_type& get_deleter() const noexcept; explicit operator bool() const noexcept; // [unique.ptr.single.modifiers], modifiers pointer release() noexcept; void reset(pointer p = pointer()) noexcept; void swap(unique_ptr& u) noexcept; // disable copy from lvalue unique_ptr(const unique_ptr&) = delete; unique_ptr& operator=(const unique_ptr&) = delete; }; }
1
#
The default type for the template parameter D is default_­delete.
A client-supplied template argument D shall be a function object type, lvalue reference to function, or lvalue reference to function object type for which, given a value d of type D and a value ptr of type unique_­ptr<T, D>​::​pointer, the expression d(ptr) is valid and has the effect of disposing of the pointer as appropriate for that deleter.
2
#
If the deleter's type D is not a reference type, D shall meet the Cpp17Destructible requirements (Table 32).
3
#
If the qualified-id remove_­reference_­t<D>​::​pointer is valid and denotes a type ([temp.deduct]), then unique_­ptr<T, D>​::​pointer shall be a synonym for remove_­reference_­t<D>​::​pointer.
Otherwise unique_­ptr<T, D>​::​pointer shall be a synonym for element_­type*.
The type unique_­ptr<T, D>​::​pointer shall meet the Cpp17NullablePointer requirements (Table 33).
4
#
[Example 1:
Given an allocator type X (Table 36) and letting A be a synonym for allocator_­traits<X>, the types A​::​pointer, A​::​const_­pointer, A​::​void_­pointer, and A​::​const_­void_­pointer may be used as unique_­ptr<T, D>​::​pointer.
— end example]

20.11.1.3.2 Constructors [unique.ptr.single.ctor]

🔗
constexpr unique_ptr() noexcept; constexpr unique_ptr(nullptr_t) noexcept;
1
#
Constraints: is_­pointer_­v<deleter_­type> is false and is_­default_­constructible_­v<deleter_­type> is true.
2
#
Preconditions: D meets the Cpp17DefaultConstructible requirements (Table 27), and that construction does not throw an exception.
3
#
Effects: Constructs a unique_­ptr object that owns nothing, value-initializing the stored pointer and the stored deleter.
4
#
Postconditions: get() == nullptr.
get_­deleter() returns a reference to the stored deleter.
🔗
explicit unique_ptr(pointer p) noexcept;
5
#
Constraints: is_­pointer_­v<deleter_­type> is false and is_­default_­constructible_­v<deleter_­type> is true.
6
#
Mandates: This constructor is not selected by class template argument deduction ([over.match.class.deduct]).
7
#
Preconditions: D meets the Cpp17DefaultConstructible requirements (Table 27), and that construction does not throw an exception.
8
#
Effects: Constructs a unique_­ptr which owns p, initializing the stored pointer with p and value-initializing the stored deleter.
9
#
Postconditions: get() == p.
get_­deleter() returns a reference to the stored deleter.
🔗
unique_ptr(pointer p, const D& d) noexcept; unique_ptr(pointer p, remove_reference_t<D>&& d) noexcept;
10
#
Constraints: is_­constructible_­v<D, decltype(d)> is true.
11
#
Mandates: These constructors are not selected by class template argument deduction ([over.match.class.deduct]).
12
#
Preconditions: For the first constructor, if D is not a reference type, D meets the Cpp17CopyConstructible requirements and such construction does not exit via an exception.
For the second constructor, if D is not a reference type, D meets the Cpp17MoveConstructible requirements and such construction does not exit via an exception.
13
#
Effects: Constructs a unique_­ptr object which owns p, initializing the stored pointer with p and initializing the deleter from std​::​forward<decltype(d)>(d).
14
#
Postconditions: get() == p.
get_­deleter() returns a reference to the stored deleter.
If D is a reference type then get_­deleter() returns a reference to the lvalue d.
15
#
Remarks: If D is a reference type, the second constructor is defined as deleted.
16
#
[Example 1: D d; unique_ptr<int, D> p1(new int, D()); // D must be Cpp17MoveConstructible unique_ptr<int, D> p2(new int, d); // D must be Cpp17CopyConstructible unique_ptr<int, D&> p3(new int, d); // p3 holds a reference to d unique_ptr<int, const D&> p4(new int, D()); // error: rvalue deleter object combined // with reference deleter type — end example]
🔗
unique_ptr(unique_ptr&& u) noexcept;
17
#
Constraints: is_­move_­constructible_­v<D> is true.
18
#
Preconditions: If D is not a reference type, D meets the Cpp17MoveConstructible requirements (Table 28).
Construction of the deleter from an rvalue of type D does not throw an exception.
19
#
Effects: Constructs a unique_­ptr from u.
If D is a reference type, this deleter is copy constructed from u's deleter; otherwise, this deleter is move constructed from u's deleter.
[Note 1:
The construction of the deleter can be implemented with std​::​forward<D>.
— end note]
20
#
Postconditions: get() yields the value u.get() yielded before the construction.
u.get() == nullptr.
get_­deleter() returns a reference to the stored deleter that was constructed from u.get_­deleter().
If D is a reference type then get_­deleter() and u.get_­deleter() both reference the same lvalue deleter.
🔗
template<class U, class E> unique_ptr(unique_ptr<U, E>&& u) noexcept;
21
#
Constraints:
  • (21.1)
    unique_­ptr<U, E>​::​pointer is implicitly convertible to pointer,
  • (21.2)
    U is not an array type, and
  • (21.3)
    either D is a reference type and E is the same type as D, or D is not a reference type and E is implicitly convertible to D.
22
#
Preconditions: If E is not a reference type, construction of the deleter from an rvalue of type E is well-formed and does not throw an exception.
Otherwise, E is a reference type and construction of the deleter from an lvalue of type E is well-formed and does not throw an exception.
23
#
Effects: Constructs a unique_­ptr from u.
If E is a reference type, this deleter is copy constructed from u's deleter; otherwise, this deleter is move constructed from u's deleter.
[Note 2:
The deleter constructor can be implemented with std​::​forward<E>.
— end note]
24
#
Postconditions: get() yields the value u.get() yielded before the construction.
u.get() == nullptr.
get_­deleter() returns a reference to the stored deleter that was constructed from u.get_­deleter().

20.11.1.3.3 Destructor [unique.ptr.single.dtor]

🔗
~unique_ptr();
1
#
Preconditions: The expression get_­deleter()(get()) is well-formed, has well-defined behavior, and does not throw exceptions.
[Note 1:
The use of default_­delete requires T to be a complete type.
— end note]
2
#
Effects: If get() == nullptr there are no effects.
Otherwise get_­deleter()(get()).

20.11.1.3.4 Assignment [unique.ptr.single.asgn]

🔗
unique_ptr& operator=(unique_ptr&& u) noexcept;
1
#
Constraints: is_­move_­assignable_­v<D> is true.
2
#
Preconditions: If D is not a reference type, D meets the Cpp17MoveAssignable requirements (Table 30) and assignment of the deleter from an rvalue of type D does not throw an exception.
Otherwise, D is a reference type; remove_­reference_­t<D> meets the Cpp17CopyAssignable requirements and assignment of the deleter from an lvalue of type D does not throw an exception.
3
#
Effects: Calls reset(u.release()) followed by get_­deleter() = std​::​forward<D>(u.get_­deleter()).
4
#
Postconditions: u.get() == nullptr.
5
#
Returns: *this.
🔗
template<class U, class E> unique_ptr& operator=(unique_ptr<U, E>&& u) noexcept;
6
#
Constraints:
  • (6.1)
    unique_­ptr<U, E>​::​pointer is implicitly convertible to pointer, and
  • (6.2)
    U is not an array type, and
  • (6.3)
    is_­assignable_­v<D&, E&&> is true.
7
#
Preconditions: If E is not a reference type, assignment of the deleter from an rvalue of type E is well-formed and does not throw an exception.
Otherwise, E is a reference type and assignment of the deleter from an lvalue of type E is well-formed and does not throw an exception.
8
#
Effects: Calls reset(u.release()) followed by get_­deleter() = std​::​forward<E>(u.get_­deleter()).
9
#
Postconditions: u.get() == nullptr.
10
#
Returns: *this.
🔗
unique_ptr& operator=(nullptr_t) noexcept;
11
#
Effects: As if by reset().
12
#
Postconditions: get() == nullptr.
13
#
Returns: *this.

20.11.1.3.5 Observers [unique.ptr.single.observers]

🔗
add_lvalue_reference_t<T> operator*() const;
1
#
Preconditions: get() != nullptr.
2
#
Returns: *get().
🔗
pointer operator->() const noexcept;
3
#
Preconditions: get() != nullptr.
4
#
Returns: get().
5
#
[Note 1:
The use of this function typically requires that T be a complete type.
— end note]
🔗
pointer get() const noexcept;
6
#
Returns: The stored pointer.
🔗
deleter_type& get_deleter() noexcept; const deleter_type& get_deleter() const noexcept;
7
#
Returns: A reference to the stored deleter.
🔗
explicit operator bool() const noexcept;
8
#
Returns: get() != nullptr.

20.11.1.3.6 Modifiers [unique.ptr.single.modifiers]

🔗
pointer release() noexcept;
1
#
Postconditions: get() == nullptr.
2
#
Returns: The value get() had at the start of the call to release.
🔗
void reset(pointer p = pointer()) noexcept;
3
#
Preconditions: The expression get_­deleter()(get()) is well-formed, has well-defined behavior, and does not throw exceptions.
4
#
Effects: Assigns p to the stored pointer, and then if and only if the old value of the stored pointer, old_­p, was not equal to nullptr, calls get_­deleter()(old_­p).
[Note 1:
The order of these operations is significant because the call to get_­deleter() might destroy *this.
— end note]
5
#
Postconditions: get() == p.
[Note 2:
The postcondition does not hold if the call to get_­deleter() destroys *this since this->get() is no longer a valid expression.
— end note]
🔗
void swap(unique_ptr& u) noexcept;
6
#
Preconditions: get_­deleter() is swappable ([swappable.requirements]) and does not throw an exception under swap.
7
#
Effects: Invokes swap on the stored pointers and on the stored deleters of *this and u.

20.11.1.4 unique_­ptr for array objects with a runtime length [unique.ptr.runtime]

20.11.1.4.1 General [unique.ptr.runtime.general]

namespace std { template<class T, class D> class unique_ptr<T[], D> { public: using pointer = see below; using element_type = T; using deleter_type = D; // [unique.ptr.runtime.ctor], constructors constexpr unique_ptr() noexcept; template<class U> explicit unique_ptr(U p) noexcept; template<class U> unique_ptr(U p, see below d) noexcept; template<class U> unique_ptr(U p, see below d) noexcept; unique_ptr(unique_ptr&& u) noexcept; template<class U, class E> unique_ptr(unique_ptr<U, E>&& u) noexcept; constexpr unique_ptr(nullptr_t) noexcept; // destructor ~unique_ptr(); // assignment unique_ptr& operator=(unique_ptr&& u) noexcept; template<class U, class E> unique_ptr& operator=(unique_ptr<U, E>&& u) noexcept; unique_ptr& operator=(nullptr_t) noexcept; // [unique.ptr.runtime.observers], observers T& operator[](size_t i) const; pointer get() const noexcept; deleter_type& get_deleter() noexcept; const deleter_type& get_deleter() const noexcept; explicit operator bool() const noexcept; // [unique.ptr.runtime.modifiers], modifiers pointer release() noexcept; template<class U> void reset(U p) noexcept; void reset(nullptr_t = nullptr) noexcept; void swap(unique_ptr& u) noexcept; // disable copy from lvalue unique_ptr(const unique_ptr&) = delete; unique_ptr& operator=(const unique_ptr&) = delete; }; }
1
#
A specialization for array types is provided with a slightly altered interface.
  • (1.1)
    Conversions between different types of unique_­ptr<T[], D> that would be disallowed for the corresponding pointer-to-array types, and conversions to or from the non-array forms of unique_­ptr, produce an ill-formed program.
  • (1.2)
    Pointers to types derived from T are rejected by the constructors, and by reset.
  • (1.3)
    The observers operator* and operator-> are not provided.
  • (1.4)
    The indexing observer operator[] is provided.
  • (1.5)
    The default deleter will call delete[].
2
#
Descriptions are provided below only for members that differ from the primary template.
3
#
The template argument T shall be a complete type.

20.11.1.4.2 Constructors [unique.ptr.runtime.ctor]

🔗
template<class U> explicit unique_ptr(U p) noexcept;
1
#
This constructor behaves the same as the constructor in the primary template that takes a single parameter of type pointer.
2
#
Constraints:
  • (2.1)
    U is the same type as pointer, or
  • (2.2)
    pointer is the same type as element_­type*, U is a pointer type V*, and V(*)[] is convertible to element_­type(*)[].
🔗
template<class U> unique_ptr(U p, see below d) noexcept; template<class U> unique_ptr(U p, see below d) noexcept;
3
#
These constructors behave the same as the constructors in the primary template that take a parameter of type pointer and a second parameter.
4
#
Constraints:
  • (4.1)
    U is the same type as pointer,
  • (4.2)
    U is nullptr_­t, or
  • (4.3)
    pointer is the same type as element_­type*, U is a pointer type V*, and V(*)[] is convertible to element_­type(*)[].
🔗
template<class U, class E> unique_ptr(unique_ptr<U, E>&& u) noexcept;
5
#
This constructor behaves the same as in the primary template.
6
#
Constraints: Where UP is unique_­ptr<U, E>:
  • (6.1)
    U is an array type, and
  • (6.2)
    pointer is the same type as element_­type*, and
  • (6.3)
    UP​::​pointer is the same type as UP​::​element_­type*, and
  • (6.4)
    UP​::​element_­type(*)[] is convertible to element_­type(*)[], and
  • (6.5)
    either D is a reference type and E is the same type as D, or D is not a reference type and E is implicitly convertible to D.
[Note 1:
This replaces the Constraints: specification of the primary template.
— end note]

20.11.1.4.3 Assignment [unique.ptr.runtime.asgn]

🔗
template<class U, class E> unique_ptr& operator=(unique_ptr<U, E>&& u) noexcept;
1
#
This operator behaves the same as in the primary template.
2
#
Constraints: Where UP is unique_­ptr<U, E>:
  • (2.1)
    U is an array type, and
  • (2.2)
    pointer is the same type as element_­type*, and
  • (2.3)
    UP​::​pointer is the same type as UP​::​element_­type*, and
  • (2.4)
    UP​::​element_­type(*)[] is convertible to element_­type(*)[], and
  • (2.5)
    is_­assignable_­v<D&, E&&> is true.
[Note 1:
This replaces the Constraints: specification of the primary template.
— end note]

20.11.1.4.4 Observers [unique.ptr.runtime.observers]

🔗
T& operator[](size_t i) const;
1
#
Preconditions: the number of elements in the array to which the stored pointer points.
2
#
Returns: get()[i].

20.11.1.4.5 Modifiers [unique.ptr.runtime.modifiers]

🔗
void reset(nullptr_t p = nullptr) noexcept;
1
#
Effects: Equivalent to reset(pointer()).
🔗
template<class U> void reset(U p) noexcept;
2
#
This function behaves the same as the reset member of the primary template.
3
#
Constraints:
  • (3.1)
    U is the same type as pointer, or
  • (3.2)
    pointer is the same type as element_­type*, U is a pointer type V*, and V(*)[] is convertible to element_­type(*)[].

20.11.1.5 Creation [unique.ptr.create]

🔗
template<class T, class... Args> unique_ptr<T> make_unique(Args&&... args);
1
#
Constraints: T is not an array type.
2
#
Returns: unique_­ptr<T>(new T(std​::​forward<Args>(args)...)).
🔗
template<class T> unique_ptr<T> make_unique(size_t n);
3
#
Constraints: T is an array of unknown bound.
4
#
Returns: unique_­ptr<T>(new remove_­extent_­t<T>[n]()).
🔗
template<class T, class... Args> unspecified make_unique(Args&&...) = delete;
5
#
Constraints: T is an array of known bound.
🔗
template<class T> unique_ptr<T> make_unique_for_overwrite();
6
#
Constraints: T is not an array type.
7
#
Returns: unique_­ptr<T>(new T).
🔗
template<class T> unique_ptr<T> make_unique_for_overwrite(size_t n);
8
#
Constraints: T is an array of unknown bound.
9
#
Returns: unique_­ptr<T>(new remove_­extent_­t<T>[n]).
🔗
template<class T, class... Args> unspecified make_unique_for_overwrite(Args&&...) = delete;
10
#
Constraints: T is an array of known bound.

20.11.1.6 Specialized algorithms [unique.ptr.special]

🔗
template<class T, class D> void swap(unique_ptr<T, D>& x, unique_ptr<T, D>& y) noexcept;
1
#
Constraints: is_­swappable_­v<D> is true.
2
#
Effects: Calls x.swap(y).
🔗
template<class T1, class D1, class T2, class D2> bool operator==(const unique_ptr<T1, D1>& x, const unique_ptr<T2, D2>& y);
3
#
Returns: x.get() == y.get().
🔗
template<class T1, class D1, class T2, class D2> bool operator<(const unique_ptr<T1, D1>& x, const unique_ptr<T2, D2>& y);
4
#
Let CT denote common_type_t<typename unique_ptr<T1, D1>::pointer, typename unique_ptr<T2, D2>::pointer>
5
#
Mandates:
  • (5.1)
    unique_­ptr<T1, D1>​::​pointer is implicitly convertible to CT and
  • (5.2)
    unique_­ptr<T2, D2>​::​pointer is implicitly convertible to CT.
6
#
Preconditions: The specialization less<CT> is a function object type ([function.objects]) that induces a strict weak ordering ([alg.sorting]) on the pointer values.
7
#
Returns: less<CT>()(x.get(), y.get()).
🔗
template<class T1, class D1, class T2, class D2> bool operator>(const unique_ptr<T1, D1>& x, const unique_ptr<T2, D2>& y);
8
#
Returns: y < x.
🔗
template<class T1, class D1, class T2, class D2> bool operator<=(const unique_ptr<T1, D1>& x, const unique_ptr<T2, D2>& y);
9
#
Returns: !(y < x).
🔗
template<class T1, class D1, class T2, class D2> bool operator>=(const unique_ptr<T1, D1>& x, const unique_ptr<T2, D2>& y);
10
#
Returns: !(x < y).
🔗
template<class T1, class D1, class T2, class D2> requires three_­way_­comparable_­with<typename unique_ptr<T1, D1>::pointer, typename unique_ptr<T2, D2>::pointer> compare_three_way_result_t<typename unique_ptr<T1, D1>::pointer, typename unique_ptr<T2, D2>::pointer> operator<=>(const unique_ptr<T1, D1>& x, const unique_ptr<T2, D2>& y);
11
#
Returns: compare_­three_­way()(x.get(), y.get()).
🔗
template<class T, class D> bool operator==(const unique_ptr<T, D>& x, nullptr_t) noexcept;
12
#
Returns: !x.
🔗
template<class T, class D> bool operator<(const unique_ptr<T, D>& x, nullptr_t); template<class T, class D> bool operator<(nullptr_t, const unique_ptr<T, D>& x);
13
#
Preconditions: The specialization less<unique_­ptr<T, D>​::​pointer> is a function object type ([function.objects]) that induces a strict weak ordering ([alg.sorting]) on the pointer values.
14
#
Returns: The first function template returns less<unique_ptr<T, D>::pointer>()(x.get(), nullptr)
The second function template returns less<unique_ptr<T, D>::pointer>()(nullptr, x.get())
🔗
template<class T, class D> bool operator>(const unique_ptr<T, D>& x, nullptr_t); template<class T, class D> bool operator>(nullptr_t, const unique_ptr<T, D>& x);
15
#
Returns: The first function template returns nullptr < x.
The second function template returns x < nullptr.
🔗
template<class T, class D> bool operator<=(const unique_ptr<T, D>& x, nullptr_t); template<class T, class D> bool operator<=(nullptr_t, const unique_ptr<T, D>& x);
16
#
Returns: The first function template returns !(nullptr < x).
The second function template returns !(x < nullptr).
🔗
template<class T, class D> bool operator>=(const unique_ptr<T, D>& x, nullptr_t); template<class T, class D> bool operator>=(nullptr_t, const unique_ptr<T, D>& x);
17
#
Returns: The first function template returns !(x < nullptr).
The second function template returns !(nullptr < x).
🔗
template<class T, class D> requires three_­way_­comparable_­with<typename unique_ptr<T, D>::pointer, nullptr_t> compare_three_way_result_t<typename unique_ptr<T, D>::pointer, nullptr_t> operator<=>(const unique_ptr<T, D>& x, nullptr_t);
18
#
Returns: compare_­three_­way()(x.get(), nullptr).

20.11.1.7 I/O [unique.ptr.io]

🔗
template<class E, class T, class Y, class D> basic_ostream<E, T>& operator<<(basic_ostream<E, T>& os, const unique_ptr<Y, D>& p);
1
#
Constraints: os << p.get() is a valid expression.
2
#
Effects: Equivalent to: os << p.get();
3
#
Returns: os.

20.11.2 Class bad_­weak_­ptr [util.smartptr.weak.bad]

namespace std { class bad_weak_ptr : public exception { public: // see [exception] for the specification of the special member functions const char* what() const noexcept override; }; }
1
#
An exception of type bad_­weak_­ptr is thrown by the shared_­ptr constructor taking a weak_­ptr.
🔗
const char* what() const noexcept override;
2
#
Returns: An implementation-defined ntbs.

20.11.3 Class template shared_­ptr [util.smartptr.shared]

20.11.3.1 General [util.smartptr.shared.general]

1
#
The shared_­ptr class template stores a pointer, usually obtained via new.
shared_­ptr implements semantics of shared ownership; the last remaining owner of the pointer is responsible for destroying the object, or otherwise releasing the resources associated with the stored pointer.
A shared_­ptr is said to be empty if it does not own a pointer.
namespace std { template<class T> class shared_ptr { public: using element_type = remove_extent_t<T>; using weak_type = weak_ptr<T>; // [util.smartptr.shared.const], constructors constexpr shared_ptr() noexcept; constexpr shared_ptr(nullptr_t) noexcept : shared_ptr() { } template<class Y> explicit shared_ptr(Y* p); template<class Y, class D> shared_ptr(Y* p, D d); template<class Y, class D, class A> shared_ptr(Y* p, D d, A a); template<class D> shared_ptr(nullptr_t p, D d); template<class D, class A> shared_ptr(nullptr_t p, D d, A a); template<class Y> shared_ptr(const shared_ptr<Y>& r, element_type* p) noexcept; template<class Y> shared_ptr(shared_ptr<Y>&& r, element_type* p) noexcept; shared_ptr(const shared_ptr& r) noexcept; template<class Y> shared_ptr(const shared_ptr<Y>& r) noexcept; shared_ptr(shared_ptr&& r) noexcept; template<class Y> shared_ptr(shared_ptr<Y>&& r) noexcept; template<class Y> explicit shared_ptr(const weak_ptr<Y>& r); template<class Y, class D> shared_ptr(unique_ptr<Y, D>&& r); // [util.smartptr.shared.dest], destructor ~shared_ptr(); // [util.smartptr.shared.assign], assignment shared_ptr& operator=(const shared_ptr& r) noexcept; template<class Y> shared_ptr& operator=(const shared_ptr<Y>& r) noexcept; shared_ptr& operator=(shared_ptr&& r) noexcept; template<class Y> shared_ptr& operator=(shared_ptr<Y>&& r) noexcept; template<class Y, class D> shared_ptr& operator=(unique_ptr<Y, D>&& r); // [util.smartptr.shared.mod], modifiers void swap(shared_ptr& r) noexcept; void reset() noexcept; template<class Y> void reset(Y* p); template<class Y, class D> void reset(Y* p, D d); template<class Y, class D, class A> void reset(Y* p, D d, A a); // [util.smartptr.shared.obs], observers element_type* get() const noexcept; T& operator*() const noexcept; T* operator->() const noexcept; element_type& operator[](ptrdiff_t i) const; long use_count() const noexcept; explicit operator bool() const noexcept; template<class U> bool owner_before(const shared_ptr<U>& b) const noexcept; template<class U> bool owner_before(const weak_ptr<U>& b) const noexcept; }; template<class T> shared_ptr(weak_ptr<T>) -> shared_ptr<T>; template<class T, class D> shared_ptr(unique_ptr<T, D>) -> shared_ptr<T>; }
2
#
Specializations of shared_­ptr shall be Cpp17CopyConstructible, Cpp17CopyAssignable, and Cpp17LessThanComparable, allowing their use in standard containers.
Specializations of shared_­ptr shall be contextually convertible to bool, allowing their use in boolean expressions and declarations in conditions.
3
#
The template parameter T of shared_­ptr may be an incomplete type.
[Note 1:
T can be a function type.
— end note]
4
#
[Example 1: if (shared_ptr<X> px = dynamic_pointer_cast<X>(py)) { // do something with px } — end example]
5
#
For purposes of determining the presence of a data race, member functions shall access and modify only the shared_­ptr and weak_­ptr objects themselves and not objects they refer to.
Changes in use_­count() do not reflect modifications that can introduce data races.
6
#
For the purposes of subclause [smartptr], a pointer type Y* is said to be compatible with a pointer type T* when either Y* is convertible to T* or Y is U[N] and T is cv U[].

20.11.3.2 Constructors [util.smartptr.shared.const]

1
#
In the constructor definitions below, enables shared_­from_­this with p, for a pointer p of type Y*, means that if Y has an unambiguous and accessible base class that is a specialization of enable_­shared_­from_­this, then remove_­cv_­t<Y>* shall be implicitly convertible to T* and the constructor evaluates the statement: if (p != nullptr && p->weak_this.expired()) p->weak_this = shared_ptr<remove_cv_t<Y>>(*this, const_cast<remove_cv_t<Y>*>(p));
The assignment to the weak_­this member is not atomic and conflicts with any potentially concurrent access to the same object ([intro.multithread]).
🔗
constexpr shared_ptr() noexcept;
2
#
Postconditions: use_­count() == 0 && get() == nullptr.
🔗
template<class Y> explicit shared_ptr(Y* p);
3
#
Mandates: Y is a complete type.
4
#
Constraints: When T is an array type, the expression delete[] p is well-formed and either T is U[N] and Y(*)[N] is convertible to T*, or T is U[] and Y(*)[] is convertible to T*.
When T is not an array type, the expression delete p is well-formed and Y* is convertible to T*.
5
#
Preconditions: The expression delete[] p, when T is an array type, or delete p, when T is not an array type, has well-defined behavior, and does not throw exceptions.
6
#
Effects: When T is not an array type, constructs a shared_­ptr object that owns the pointer p.
Otherwise, constructs a shared_­ptr that owns p and a deleter of an unspecified type that calls delete[] p.
When T is not an array type, enables shared_­from_­this with p.
If an exception is thrown, delete p is called when T is not an array type, delete[] p otherwise.
7
#
Postconditions: use_­count() == 1 && get() == p.
8
#
Throws: bad_­alloc, or an implementation-defined exception when a resource other than memory could not be obtained.
🔗
template<class Y, class D> shared_ptr(Y* p, D d); template<class Y, class D, class A> shared_ptr(Y* p, D d, A a); template<class D> shared_ptr(nullptr_t p, D d); template<class D, class A> shared_ptr(nullptr_t p, D d, A a);
9
#
Constraints: is_­move_­constructible_­v<D> is true, and d(p) is a well-formed expression.
For the first two overloads:
  • (9.1)
    If T is an array type, then either T is U[N] and Y(*)[N] is convertible to T*, or T is U[] and Y(*)[] is convertible to T*.
  • (9.2)
    If T is not an array type, then Y* is convertible to T*.
10
#
Preconditions: Construction of d and a deleter of type D initialized with std​::​move(d) do not throw exceptions.
The expression d(p) has well-defined behavior and does not throw exceptions.
A meets the Cpp17Allocator requirements (Table 36).
11
#
Effects: Constructs a shared_­ptr object that owns the object p and the deleter d.
When T is not an array type, the first and second constructors enable shared_­from_­this with p.
The second and fourth constructors shall use a copy of a to allocate memory for internal use.
If an exception is thrown, d(p) is called.
12
#
Postconditions: use_­count() == 1 && get() == p.
13
#
Throws: bad_­alloc, or an implementation-defined exception when a resource other than memory could not be obtained.
🔗
template<class Y> shared_ptr(const shared_ptr<Y>& r, element_type* p) noexcept; template<class Y> shared_ptr(shared_ptr<Y>&& r, element_type* p) noexcept;
14
#
Effects: Constructs a shared_­ptr instance that stores p and shares ownership with the initial value of r.
15
#
Postconditions: get() == p.
For the second overload, r is empty and r.get() == nullptr.
16
#
[Note 1:
Use of this constructor leads to a dangling pointer unless p remains valid at least until the ownership group of r is destroyed.
— end note]
17
#
[Note 2:
This constructor allows creation of an empty shared_­ptr instance with a non-null stored pointer.
— end note]
🔗
shared_ptr(const shared_ptr& r) noexcept; template<class Y> shared_ptr(const shared_ptr<Y>& r) noexcept;
18
#
Constraints: For the second constructor, Y* is compatible with T*.
19
#
Effects: If r is empty, constructs an empty shared_­ptr object; otherwise, constructs a shared_­ptr object that shares ownership with r.
20
#
Postconditions: get() == r.get() && use_­count() == r.use_­count().
🔗
shared_ptr(shared_ptr&& r) noexcept; template<class Y> shared_ptr(shared_ptr<Y>&& r) noexcept;
21
#
Constraints: For the second constructor, Y* is compatible with T*.
22
#
Effects: Move constructs a shared_­ptr instance from r.
23
#
Postconditions: *this shall contain the old value of r.
r shall be empty.
r.get() == nullptr.
🔗
template<class Y> explicit shared_ptr(const weak_ptr<Y>& r);
24
#
Constraints: Y* is compatible with T*.
25
#
Effects: Constructs a shared_­ptr object that shares ownership with r and stores a copy of the pointer stored in r.
If an exception is thrown, the constructor has no effect.
26
#
Postconditions: use_­count() == r.use_­count().
27
#
Throws: bad_­weak_­ptr when r.expired().
🔗
template<class Y, class D> shared_ptr(unique_ptr<Y, D>&& r);
28
#
Constraints: Y* is compatible with T* and unique_­ptr<Y, D>​::​pointer is convertible to element_­type*.
29
#
Effects: If r.get() == nullptr, equivalent to shared_­ptr().
Otherwise, if D is not a reference type, equivalent to shared_­ptr(r.release(), r.get_­deleter()).
Otherwise, equivalent to shared_­ptr(r.release(), ref(r.get_­deleter())).
If an exception is thrown, the constructor has no effect.

20.11.3.3 Destructor [util.smartptr.shared.dest]

🔗
~shared_ptr();
1
#
Effects:
  • (1.1)
    If *this is empty or shares ownership with another shared_­ptr instance (use_­count() > 1), there are no side effects.
  • (1.2)
    Otherwise, if *this owns an object p and a deleter d, d(p) is called.
  • (1.3)
    Otherwise, *this owns a pointer p, and delete p is called.
2
#
[Note 1:
Since the destruction of *this decreases the number of instances that share ownership with *this by one, after *this has been destroyed all shared_­ptr instances that shared ownership with *this will report a use_­count() that is one less than its previous value.
— end note]

20.11.3.4 Assignment [util.smartptr.shared.assign]

🔗
shared_ptr& operator=(const shared_ptr& r) noexcept; template<class Y> shared_ptr& operator=(const shared_ptr<Y>& r) noexcept;
1
#
Effects: Equivalent to shared_­ptr(r).swap(*this).
2
#
Returns: *this.
3
#
[Note 1:
The use count updates caused by the temporary object construction and destruction are not observable side effects, so the implementation can meet the effects (and the implied guarantees) via different means, without creating a temporary.
In particular, in the example: shared_ptr<int> p(new int); shared_ptr<void> q(p); p = p; q = p; both assignments can be no-ops.
— end note]
🔗
shared_ptr& operator=(shared_ptr&& r) noexcept; template<class Y> shared_ptr& operator=(shared_ptr<Y>&& r) noexcept;
4
#
Effects: Equivalent to shared_­ptr(std​::​move(r)).swap(*this).
5
#
Returns: *this.
🔗
template<class Y, class D> shared_ptr& operator=(unique_ptr<Y, D>&& r);
6
#
Effects: Equivalent to shared_­ptr(std​::​move(r)).swap(*this).
7
#
Returns: *this.

20.11.3.5 Modifiers [util.smartptr.shared.mod]

🔗
void swap(shared_ptr& r) noexcept;
1
#
Effects: Exchanges the contents of *this and r.
🔗
void reset() noexcept;
2
#
Effects: Equivalent to shared_­ptr().swap(*this).
🔗
template<class Y> void reset(Y* p);
3
#
Effects: Equivalent to shared_­ptr(p).swap(*this).
🔗
template<class Y, class D> void reset(Y* p, D d);
4
#
Effects: Equivalent to shared_­ptr(p, d).swap(*this).
🔗
template<class Y, class D, class A> void reset(Y* p, D d, A a);
5
#
Effects: Equivalent to shared_­ptr(p, d, a).swap(*this).

20.11.3.6 Observers [util.smartptr.shared.obs]

🔗
element_type* get() const noexcept;
1
#
Returns: The stored pointer.
🔗
T& operator*() const noexcept;
2
#
Preconditions: get() != 0.
3
#
Returns: *get().
4
#
Remarks: When T is an array type or cv void, it is unspecified whether this member function is declared.
If it is declared, it is unspecified what its return type is, except that the declaration (although not necessarily the definition) of the function shall be well-formed.
🔗
T* operator->() const noexcept;
5
#
Preconditions: get() != 0.
6
#
Returns: get().
7
#
Remarks: When T is an array type, it is unspecified whether this member function is declared.
If it is declared, it is unspecified what its return type is, except that the declaration (although not necessarily the definition) of the function shall be well-formed.
🔗
element_type& operator[](ptrdiff_t i) const;
8
#
Preconditions: get() != 0 && i >= 0.
If T is U[N], i < N.
9
#
Returns: get()[i].
10
#
Throws: Nothing.
11
#
Remarks: When T is not an array type, it is unspecified whether this member function is declared.
If it is declared, it is unspecified what its return type is, except that the declaration (although not necessarily the definition) of the function shall be well-formed.
🔗
long use_count() const noexcept;
12
#
Returns: The number of shared_­ptr objects, *this included, that share ownership with *this, or 0 when *this is empty.
13
#
Synchronization: None.
14
#
[Note 1:
get() == nullptr does not imply a specific return value of use_­count().
— end note]
15
#
[Note 2:
weak_­ptr<T>​::​lock() can affect the return value of use_­count().
— end note]
16
#
[Note 3:
When multiple threads might affect the return value of use_­count(), the result is approximate.
In particular, use_­count() == 1 does not imply that accesses through a previously destroyed shared_­ptr have in any sense completed.
— end note]
🔗
explicit operator bool() const noexcept;
17
#
Returns: get() != 0.
🔗
template<class U> bool owner_before(const shared_ptr<U>& b) const noexcept; template<class U> bool owner_before(const weak_ptr<U>& b) const noexcept;
18
#
Returns: An unspecified value such that
  • (18.1)
    x.owner_­before(y) defines a strict weak ordering as defined in [alg.sorting];
  • (18.2)
    under the equivalence relation defined by owner_­before, !a.owner_­before(b) && !b.owner_­before(a), two shared_­ptr or weak_­ptr instances are equivalent if and only if they share ownership or are both empty.

20.11.3.7 Creation [util.smartptr.shared.create]

1
#
The common requirements that apply to all make_­shared, allocate_­shared, make_­shared_­for_­overwrite, and allocate_­shared_­for_­overwrite overloads, unless specified otherwise, are described below.
🔗
template<class T, ...> shared_ptr<T> make_shared(args); template<class T, class A, ...> shared_ptr<T> allocate_shared(const A& a, args); template<class T, ...> shared_ptr<T> make_shared_for_overwrite(args); template<class T, class A, ...> shared_ptr<T> allocate_shared_for_overwrite(const A& a, args);
2
#
Preconditions: A meets the Cpp17Allocator requirements (Table 36).
3
#
Effects: Allocates memory for an object of type T (or U[N] when T is U[], where N is determined from args as specified by the concrete overload).
The object is initialized from args as specified by the concrete overload.
The allocate_­shared and allocate_­shared_­for_­overwrite templates use a copy of a (rebound for an unspecified value_­type) to allocate memory.
If an exception is thrown, the functions have no effect.
4
#
Postconditions: r.get() != 0 && r.use_­count() == 1, where r is the return value.
5
#
Returns: A shared_­ptr instance that stores and owns the address of the newly constructed object.
6
#
Throws: bad_­alloc, or an exception thrown from allocate or from the initialization of the object.
7
#
Remarks:
  • (7.1)
    Implementations should perform no more than one memory allocation.
    [Note 1:
    This provides efficiency equivalent to an intrusive smart pointer.
    — end note]
  • (7.2)
    When an object of an array type U is specified to have an initial value of u (of the same type), this shall be interpreted to mean that each array element of the object has as its initial value the corresponding element from u.
  • (7.3)
    When an object of an array type is specified to have a default initial value, this shall be interpreted to mean that each array element of the object has a default initial value.
  • (7.4)
    When a (sub)object of a non-array type U is specified to have an initial value of v, or U(l...), where l... is a list of constructor arguments, make_­shared shall initialize this (sub)object via the expression ​::​new(pv) U(v) or ​::​new(pv) U(l...) respectively, where pv has type void* and points to storage suitable to hold an object of type U.
  • (7.5)
    When a (sub)object of a non-array type U is specified to have an initial value of v, or U(l...), where l... is a list of constructor arguments, allocate_­shared shall initialize this (sub)object via the expression
    • (7.5.1)
      allocator_­traits<A2>​::​construct(a2, pv, v) or
    • (7.5.2)
      allocator_­traits<A2>​::​construct(a2, pv, l...)
    respectively, where pv points to storage suitable to hold an object of type U and a2 of type A2 is a rebound copy of the allocator a passed to allocate_­shared such that its value_­type is remove_­cv_­t<U>.
  • (7.6)
    When a (sub)object of non-array type U is specified to have a default initial value, make_­shared shall initialize this (sub)object via the expression ​::​new(pv) U(), where pv has type void* and points to storage suitable to hold an object of type U.
  • (7.7)
    When a (sub)object of non-array type U is specified to have a default initial value, allocate_­shared shall initialize this (sub)object via the expression allocator_­traits<A2>​::​construct(a2, pv), where pv points to storage suitable to hold an object of type U and a2 of type A2 is a rebound copy of the allocator a passed to allocate_­shared such that its value_­type is remove_­cv_­t<U>.
  • (7.8)
    When a (sub)object of non-array type U is initialized by make_­shared_­for_­overwrite or
    allocate_­shared_­for_­overwrite, it is initialized via the expression ​::​new(pv) U, where pv has type void* and points to storage suitable to hold an object of type U.
  • (7.9)
    Array elements are initialized in ascending order of their addresses.
  • (7.10)
    When the lifetime of the object managed by the return value ends, or when the initialization of an array element throws an exception, the initialized elements are destroyed in the reverse order of their original construction.
  • (7.11)
    When a (sub)object of non-array type U that was initialized by make_­shared is to be destroyed, it is destroyed via the expression pv->~U() where pv points to that object of type U.
  • (7.12)
    When a (sub)object of non-array type U that was initialized by allocate_­shared is to be destroyed, it is destroyed via the expression allocator_­traits<A2>​::​destroy(a2, pv) where pv points to that object of type remove_­cv_­t<U> and a2 of type A2 is a rebound copy of the allocator a passed to allocate_­shared such that its value_­type is remove_­cv_­t<U>.
[Note 2:
These functions will typically allocate more memory than sizeof(T) to allow for internal bookkeeping structures such as reference counts.
— end note]
🔗
template<class T, class... Args> shared_ptr<T> make_shared(Args&&... args); // T is not array template<class T, class A, class... Args> shared_ptr<T> allocate_shared(const A& a, Args&&... args); // T is not array
8
#
Constraints: T is not an array type.
9
#
Returns: A shared_­ptr to an object of type T with an initial value T(forward<Args>(args)...).
10
#
Remarks: The shared_­ptr constructors called by these functions enable shared_­from_­this with the address of the newly constructed object of type T.
11
#
[Example 1: shared_ptr<int> p = make_shared<int>(); // shared_­ptr to int() shared_ptr<vector<int>> q = make_shared<vector<int>>(16, 1); // shared_­ptr to vector of 16 elements with value 1 — end example]
🔗
template<class T> shared_ptr<T> make_shared(size_t N); // T is U[] template<class T, class A> shared_ptr<T> allocate_shared(const A& a, size_t N); // T is U[]
12
#
Constraints: T is of the form U[].
13
#
Returns: A shared_­ptr to an object of type U[N] with a default initial value, where U is remove_­extent_­t<T>.
14
#
[Example 2: shared_ptr<double[]> p = make_shared<double[]>(1024); // shared_­ptr to a value-initialized double[1024] shared_ptr<double[][2][2]> q = make_shared<double[][2][2]>(6); // shared_­ptr to a value-initialized double[6][2][2] — end example]
🔗
template<class T> shared_ptr<T> make_shared(); // T is U[N] template<class T, class A> shared_ptr<T> allocate_shared(const A& a); // T is U[N]
15
#
Constraints: T is of the form U[N].
16
#
Returns: A shared_­ptr to an object of type T with a default initial value.
17
#
[Example 3: shared_ptr<double[1024]> p = make_shared<double[1024]>(); // shared_­ptr to a value-initialized double[1024] shared_ptr<double[6][2][2]> q = make_shared<double[6][2][2]>(); // shared_­ptr to a value-initialized double[6][2][2] — end example]
🔗
template<class T> shared_ptr<T> make_shared(size_t N, const remove_extent_t<T>& u); // T is U[] template<class T, class A> shared_ptr<T> allocate_shared(const A& a, size_t N, const remove_extent_t<T>& u); // T is U[]
18
#
Constraints: T is of the form U[].
19
#
Returns: A shared_­ptr to an object of type U[N], where U is remove_­extent_­t<T> and each array element has an initial value of u.
20
#
[Example 4: shared_ptr<double[]> p = make_shared<double[]>(1024, 1.0); // shared_­ptr to a double[1024], where each element is 1.0 shared_ptr<double[][2]> q = make_shared<double[][2]>(6, {1.0, 0.0}); // shared_­ptr to a double[6][2], where each double[2] element is {1.0, 0.0} shared_ptr<vector<int>[]> r = make_shared<vector<int>[]>(4, {1, 2}); // shared_­ptr to a vector<int>[4], where each vector has contents {1, 2} — end example]
🔗
template<class T> shared_ptr<T> make_shared(const remove_extent_t<T>& u); // T is U[N] template<class T, class A> shared_ptr<T> allocate_shared(const A& a, const remove_extent_t<T>& u); // T is U[N]
21
#
Constraints: T is of the form U[N].
22
#
Returns: A shared_­ptr to an object of type T, where each array element of type remove_­extent_­t<T> has an initial value of u.
23
#
[Example 5: shared_ptr<double[1024]> p = make_shared<double[1024]>(1.0); // shared_­ptr to a double[1024], where each element is 1.0 shared_ptr<double[6][2]> q = make_shared<double[6][2]>({1.0, 0.0}); // shared_­ptr to a double[6][2], where each double[2] element is {1.0, 0.0} shared_ptr<vector<int>[4]> r = make_shared<vector<int>[4]>({1, 2}); // shared_­ptr to a vector<int>[4], where each vector has contents {1, 2} — end example]
🔗
template<class T> shared_ptr<T> make_shared_for_overwrite(); template<class T, class A> shared_ptr<T> allocate_shared_for_overwrite(const A& a);
24
#
Constraints: T is not an array of unknown bound.
25
#
Returns: A shared_­ptr to an object of type T.
26
#
[Example 6: struct X { double data[1024]; }; shared_ptr<X> p = make_shared_for_overwrite<X>(); // shared_­ptr to a default-initialized X, where each element in X​::​data has an indeterminate value shared_ptr<double[1024]> q = make_shared_for_overwrite<double[1024]>(); // shared_­ptr to a default-initialized double[1024], where each element has an indeterminate value — end example]
🔗
template<class T> shared_ptr<T> make_shared_for_overwrite(size_t N); template<class T, class A> shared_ptr<T> allocate_shared_for_overwrite(const A& a, size_t N);
27
#
Constraints: T is an array of unknown bound.
28
#
Returns: A shared_­ptr to an object of type U[N], where U is remove_­extent_­t<T>.
29
#
[Example 7: shared_ptr<double[]> p = make_shared_for_overwrite<double[]>(1024); // shared_­ptr to a default-initialized double[1024], where each element has an indeterminate value — end example]

20.11.3.8 Comparison [util.smartptr.shared.cmp]

🔗
template<class T, class U> bool operator==(const shared_ptr<T>& a, const shared_ptr<U>& b) noexcept;
1
#
Returns: a.get() == b.get().
🔗
template<class T> bool operator==(const shared_ptr<T>& a, nullptr_t) noexcept;
2
#
Returns: !a.
🔗
template<class T, class U> strong_ordering operator<=>(const shared_ptr<T>& a, const shared_ptr<U>& b) noexcept;
3
#
Returns: compare_­three_­way()(a.get(), b.get()).
4
#
[Note 1:
Defining a comparison operator function allows shared_­ptr objects to be used as keys in associative containers.
— end note]
🔗
template<class T> strong_ordering operator<=>(const shared_ptr<T>& a, nullptr_t) noexcept;
5
#
Returns: compare_­three_­way()(a.get(), nullptr).

20.11.3.9 Specialized algorithms [util.smartptr.shared.spec]

🔗
template<class T> void swap(shared_ptr<T>& a, shared_ptr<T>& b) noexcept;
1
#
Effects: Equivalent to a.swap(b).

20.11.3.10 Casts [util.smartptr.shared.cast]

🔗
template<class T, class U> shared_ptr<T> static_pointer_cast(const shared_ptr<U>& r) noexcept; template<class T, class U> shared_ptr<T> static_pointer_cast(shared_ptr<U>&& r) noexcept;
1
#
Mandates: The expression static_­cast<T*>((U*)nullptr) is well-formed.
2
#
Returns: shared_ptr<T>(R, static_cast<typename shared_ptr<T>::element_type*>(r.get())) where R is r for the first overload, and std​::​move(r) for the second.
3
#
[Note 1:
The seemingly equivalent expression shared_­ptr<T>(static_­cast<T*>(r.get())) will eventually result in undefined behavior, attempting to delete the same object twice.
— end note]
🔗
template<class T, class U> shared_ptr<T> dynamic_pointer_cast(const shared_ptr<U>& r) noexcept; template<class T, class U> shared_ptr<T> dynamic_pointer_cast(shared_ptr<U>&& r) noexcept;
4
#
Mandates: The expression dynamic_­cast<T*>((U*)nullptr) is well-formed.
The expression dynamic_­cast<typename shared_­ptr<T>​::​element_­type*>(r.get()) is well-formed.
5
#
Preconditions: The expression dynamic_­cast<typename shared_­ptr<T>​::​element_­type*>(r.get()) has well-defined behavior.
6
#
Returns:
  • (6.1)
    When dynamic_­cast<typename shared_­ptr<T>​::​element_­type*>(r.get()) returns a non-null value p, shared_­ptr<T>(R, p), where R is r for the first overload, and std​::​move(r) for the second.
  • (6.2)
    Otherwise, shared_­ptr<T>().
7
#
[Note 2:
The seemingly equivalent expression shared_­ptr<T>(dynamic_­cast<T*>(r.get())) will eventually result in undefined behavior, attempting to delete the same object twice.
— end note]
🔗
template<class T, class U> shared_ptr<T> const_pointer_cast(const shared_ptr<U>& r) noexcept; template<class T, class U> shared_ptr<T> const_pointer_cast(shared_ptr<U>&& r) noexcept;
8
#
Mandates: The expression const_­cast<T*>((U*)nullptr) is well-formed.
9
#
Returns: shared_ptr<T>(R, const_cast<typename shared_ptr<T>::element_type*>(r.get())) where R is r for the first overload, and std​::​move(r) for the second.
10
#
[Note 3:
The seemingly equivalent expression shared_­ptr<T>(const_­cast<T*>(r.get())) will eventually result in undefined behavior, attempting to delete the same object twice.
— end note]
🔗
template<class T, class U> shared_ptr<T> reinterpret_pointer_cast(const shared_ptr<U>& r) noexcept; template<class T, class U> shared_ptr<T> reinterpret_pointer_cast(shared_ptr<U>&& r) noexcept;
11
#
Mandates: The expression reinterpret_­cast<T*>((U*)nullptr) is well-formed.
12
#
Returns: shared_ptr<T>(R, reinterpret_cast<typename shared_ptr<T>::element_type*>(r.get())) where R is r for the first overload, and std​::​move(r) for the second.
13
#
[Note 4:
The seemingly equivalent expression shared_­ptr<T>(reinterpret_­cast<T*>(r.get())) will eventually result in undefined behavior, attempting to delete the same object twice.
— end note]

20.11.3.11 get_­deleter [util.smartptr.getdeleter]

🔗
template<class D, class T> D* get_deleter(const shared_ptr<T>& p) noexcept;
1
#
Returns: If p owns a deleter d of type cv-unqualified D, returns addressof(d); otherwise returns nullptr.
The returned pointer remains valid as long as there exists a shared_­ptr instance that owns d.
[Note 1:
It is unspecified whether the pointer remains valid longer than that.
This can happen if the implementation doesn't destroy the deleter until all weak_­ptr instances that share ownership with p have been destroyed.
— end note]

20.11.3.12 I/O [util.smartptr.shared.io]

🔗
template<class E, class T, class Y> basic_ostream<E, T>& operator<<(basic_ostream<E, T>& os, const shared_ptr<Y>& p);
1
#
Effects: As if by: os << p.get();
2
#
Returns: os.

20.11.4 Class template weak_­ptr [util.smartptr.weak]

20.11.4.1 General [util.smartptr.weak.general]

1
#
The weak_­ptr class template stores a weak reference to an object that is already managed by a shared_­ptr.
To access the object, a weak_­ptr can be converted to a shared_­ptr using the member function lock.
namespace std { template<class T> class weak_ptr { public: using element_type = remove_extent_t<T>; // [util.smartptr.weak.const], constructors constexpr weak_ptr() noexcept; template<class Y> weak_ptr(const shared_ptr<Y>& r) noexcept; weak_ptr(const weak_ptr& r) noexcept; template<class Y> weak_ptr(const weak_ptr<Y>& r) noexcept; weak_ptr(weak_ptr&& r) noexcept; template<class Y> weak_ptr(weak_ptr<Y>&& r) noexcept; // [util.smartptr.weak.dest], destructor ~weak_ptr(); // [util.smartptr.weak.assign], assignment weak_ptr& operator=(const weak_ptr& r) noexcept; template<class Y> weak_ptr& operator=(const weak_ptr<Y>& r) noexcept; template<class Y> weak_ptr& operator=(const shared_ptr<Y>& r) noexcept; weak_ptr& operator=(weak_ptr&& r) noexcept; template<class Y> weak_ptr& operator=(weak_ptr<Y>&& r) noexcept; // [util.smartptr.weak.mod], modifiers void swap(weak_ptr& r) noexcept; void reset() noexcept; // [util.smartptr.weak.obs], observers long use_count() const noexcept; bool expired() const noexcept; shared_ptr<T> lock() const noexcept; template<class U> bool owner_before(const shared_ptr<U>& b) const noexcept; template<class U> bool owner_before(const weak_ptr<U>& b) const noexcept; }; template<class T> weak_ptr(shared_ptr<T>) -> weak_ptr<T>; // [util.smartptr.weak.spec], specialized algorithms template<class T> void swap(weak_ptr<T>& a, weak_ptr<T>& b) noexcept; }
2
#
Specializations of weak_­ptr shall be Cpp17CopyConstructible and Cpp17CopyAssignable, allowing their use in standard containers.
The template parameter T of weak_­ptr may be an incomplete type.

20.11.4.2 Constructors [util.smartptr.weak.const]

🔗
constexpr weak_ptr() noexcept;
1
#
Effects: Constructs an empty weak_­ptr object.
2
#
Postconditions: use_­count() == 0.
🔗
weak_ptr(const weak_ptr& r) noexcept; template<class Y> weak_ptr(const weak_ptr<Y>& r) noexcept; template<class Y> weak_ptr(const shared_ptr<Y>& r) noexcept;
3
#
Constraints: For the second and third constructors, Y* is compatible with T*.
4
#
Effects: If r is empty, constructs an empty weak_­ptr object; otherwise, constructs a weak_­ptr object that shares ownership with r and stores a copy of the pointer stored in r.
5
#
Postconditions: use_­count() == r.use_­count().
🔗
weak_ptr(weak_ptr&& r) noexcept; template<class Y> weak_ptr(weak_ptr<Y>&& r) noexcept;
6
#
Constraints: For the second constructor, Y* is compatible with T*.
7
#
Effects: Move constructs a weak_­ptr instance from r.
8
#
Postconditions: *this shall contain the old value of r.
r shall be empty.
r.use_­count() == 0.

20.11.4.3 Destructor [util.smartptr.weak.dest]

🔗
~weak_ptr();
1
#
Effects: Destroys this weak_­ptr object but has no effect on the object its stored pointer points to.

20.11.4.4 Assignment [util.smartptr.weak.assign]

🔗
weak_ptr& operator=(const weak_ptr& r) noexcept; template<class Y> weak_ptr& operator=(const weak_ptr<Y>& r) noexcept; template<class Y> weak_ptr& operator=(const shared_ptr<Y>& r) noexcept;
1
#
Effects: Equivalent to weak_­ptr(r).swap(*this).
2
#
Returns: *this.
3
#
Remarks: The implementation may meet the effects (and the implied guarantees) via different means, without creating a temporary object.
🔗
weak_ptr& operator=(weak_ptr&& r) noexcept; template<class Y> weak_ptr& operator=(weak_ptr<Y>&& r) noexcept;
4
#
Effects: Equivalent to weak_­ptr(std​::​move(r)).swap(*this).
5
#
Returns: *this.

20.11.4.5 Modifiers [util.smartptr.weak.mod]

🔗
void swap(weak_ptr& r) noexcept;
1
#
Effects: Exchanges the contents of *this and r.
🔗
void reset() noexcept;
2
#
Effects: Equivalent to weak_­ptr().swap(*this).

20.11.4.6 Observers [util.smartptr.weak.obs]

🔗
long use_count() const noexcept;
1
#
Returns: 0 if *this is empty; otherwise, the number of shared_­ptr instances that share ownership with *this.
🔗
bool expired() const noexcept;
2
#
Returns: use_­count() == 0.
🔗
shared_ptr<T> lock() const noexcept;
3
#
Returns: expired() ? shared_­ptr<T>() : shared_­ptr<T>(*this), executed atomically.
🔗
template<class U> bool owner_before(const shared_ptr<U>& b) const noexcept; template<class U> bool owner_before(const weak_ptr<U>& b) const noexcept;
4
#
Returns: An unspecified value such that
  • (4.1)
    x.owner_­before(y) defines a strict weak ordering as defined in [alg.sorting];
  • (4.2)
    under the equivalence relation defined by owner_­before, !a.owner_­before(b) && !b.owner_­before(a), two shared_­ptr or weak_­ptr instances are equivalent if and only if they share ownership or are both empty.

20.11.4.7 Specialized algorithms [util.smartptr.weak.spec]

🔗
template<class T> void swap(weak_ptr<T>& a, weak_ptr<T>& b) noexcept;
1
#
Effects: Equivalent to a.swap(b).

20.11.5 Class template owner_­less [util.smartptr.ownerless]

1
#
The class template owner_­less allows ownership-based mixed comparisons of shared and weak pointers.
namespace std { template<class T = void> struct owner_less; template<class T> struct owner_less<shared_ptr<T>> { bool operator()(const shared_ptr<T>&, const shared_ptr<T>&) const noexcept; bool operator()(const shared_ptr<T>&, const weak_ptr<T>&) const noexcept; bool operator()(const weak_ptr<T>&, const shared_ptr<T>&) const noexcept; }; template<class T> struct owner_less<weak_ptr<T>> { bool operator()(const weak_ptr<T>&, const weak_ptr<T>&) const noexcept; bool operator()(const shared_ptr<T>&, const weak_ptr<T>&) const noexcept; bool operator()(const weak_ptr<T>&, const shared_ptr<T>&) const noexcept; }; template<> struct owner_less<void> { template<class T, class U> bool operator()(const shared_ptr<T>&, const shared_ptr<U>&) const noexcept; template<class T, class U> bool operator()(const shared_ptr<T>&, const weak_ptr<U>&) const noexcept; template<class T, class U> bool operator()(const weak_ptr<T>&, const shared_ptr<U>&) const noexcept; template<class T, class U> bool operator()(const weak_ptr<T>&, const weak_ptr<U>&) const noexcept; using is_transparent = unspecified; }; }
2
#
operator()(x, y) returns x.owner_­before(y).
[Note 1:
Note that
  • (2.1)
    operator() defines a strict weak ordering as defined in [alg.sorting];
  • (2.2)
    two shared_­ptr or weak_­ptr instances are equivalent under the equivalence relation defined by operator(), !operator()(a, b) && !operator()(b, a), if and only if they share ownership or are both empty.
— end note]

20.11.6 Class template enable_­shared_­from_­this [util.smartptr.enab]

1
#
A class T can inherit from enable_­shared_­from_­this<T> to inherit the shared_­from_­this member functions that obtain a shared_­ptr instance pointing to *this.
2
#
[Example 1: struct X: public enable_shared_from_this<X> { }; int main() { shared_ptr<X> p(new X); shared_ptr<X> q = p->shared_from_this(); assert(p == q); assert(!p.owner_before(q) && !q.owner_before(p)); // p and q share ownership } — end example]
namespace std { template<class T> class enable_shared_from_this { protected: constexpr enable_shared_from_this() noexcept; enable_shared_from_this(const enable_shared_from_this&) noexcept; enable_shared_from_this& operator=(const enable_shared_from_this&) noexcept; ~enable_shared_from_this(); public: shared_ptr<T> shared_from_this(); shared_ptr<T const> shared_from_this() const; weak_ptr<T> weak_from_this() noexcept; weak_ptr<T const> weak_from_this() const noexcept; private: mutable weak_ptr<T> weak_this; // exposition only }; }
3
#
The template parameter T of enable_­shared_­from_­this may be an incomplete type.
🔗
constexpr enable_shared_from_this() noexcept; enable_shared_from_this(const enable_shared_from_this<T>&) noexcept;
4
#
Effects: Value-initializes weak_­this.
🔗
enable_shared_from_this<T>& operator=(const enable_shared_from_this<T>&) noexcept;
5
#
Returns: *this.
6
#
[Note 1:
weak_­this is not changed.
— end note]
🔗
shared_ptr<T> shared_from_this(); shared_ptr<T const> shared_from_this() const;
7
#
Returns: shared_­ptr<T>(weak_­this).
🔗
weak_ptr<T> weak_from_this() noexcept; weak_ptr<T const> weak_from_this() const noexcept;
8
#
Returns: weak_­this.

20.11.7 Smart pointer hash support [util.smartptr.hash]

🔗
template<class T, class D> struct hash<unique_ptr<T, D>>;
1
#
Letting UP be unique_­ptr<T,D>, the specialization hash<UP> is enabled ([unord.hash]) if and only if hash<typename UP​::​pointer> is enabled.
When enabled, for an object p of type UP, hash<UP>()(p) evaluates to the same value as hash<typename UP​::​pointer>()(p.get()).
The member functions are not guaranteed to be noexcept.
🔗
template<class T> struct hash<shared_ptr<T>>;
2
#
For an object p of type shared_­ptr<T>, hash<shared_­ptr<T>>()(p) evaluates to the same value as hash<typename shared_­ptr<T>​::​element_­type*>()(p.get()).