27 Time library [time]

27.12 Formatting [time.format]

1
#
Each formatter ([format.formatter]) specialization in the chrono library ([time.syn]) meets the Formatter requirements ([formatter.requirements]).
The parse member functions of these formatters interpret the format specification as a chrono-format-spec according to the following syntax:
chrono-format-spec:
fill-and-align width precision chrono-specs
chrono-specs:
conversion-spec
chrono-specs conversion-spec
chrono-specs literal-char
literal-char:
any character other than {, }, or %
conversion-spec:
% modifier type
modifier: one of
E O
type: one of
a A b B c C d D e F g G h H I j m M n
p q Q r R S t T u U V w W x X y Y z Z %
The productions fill-and-align, width, and precision are described in [format.string].
Giving a precision specification in the chrono-format-spec is valid only for std​::​chrono​::​duration types where the representation type Rep is a floating-point type.
For all other Rep types, an exception of type format_­error is thrown if the chrono-format-spec contains a precision specification.
All ordinary multibyte characters represented by literal-char are copied unchanged to the output.
2
#
Each conversion specifier conversion-spec is replaced by appropriate characters as described in Table 99; the formats specified in ISO 8601:2004 shall be used where so described.
Some of the conversion specifiers depend on the locale that is passed to the formatting function if the latter takes one, or the global locale otherwise.
If the formatted object does not contain the information the conversion specifier refers to, an exception of type format_­error is thrown.
3
#
The result of formatting a std​::​chrono​::​duration instance holding a negative value, or an hh_­mm_­ss object h for which h.is_­negative() is true, is equivalent to the output of the corresponding positive value, with a STATICALLY-WIDEN<charT>("-") character sequence placed before the replacement of the initial conversion specifier.
[Example 1: cout << format("{:%T}", -10'000s); // prints: -02:46:40 cout << format("{:%H:%M:%S}", -10'000s); // prints: -02:46:40 cout << format("minutes {:%M, hours %H, seconds %S}", -10'000s); // prints: minutes -46, hours 02, seconds 40 — end example]
4
#
Unless explicitly requested, the result of formatting a chrono type does not contain time zone abbreviation and time zone offset information.
If the information is available, the conversion specifiers %Z and %z will format this information (respectively).
[Note 1:
If the information is not available and a %Z or %z conversion specifier appears in the chrono-format-spec, an exception of type format_­error is thrown, as described above.
— end note]
5
#
If the type being formatted does not contain the information that the format flag needs, an exception of type format_­error is thrown.
[Example 2:
A duration does not contain enough information to format as a weekday.
— end example]
However, if a flag refers to a “time of day” (e.g. %H, %I, %p, etc.)
, then a specialization of duration is interpreted as the time of day elapsed since midnight.
Table 99: Meaning of conversion specifiers [tab:time.format.spec]
Specifier
Replacement
%a
The locale's abbreviated weekday name.
If the value does not contain a valid weekday, an exception of type format_­error is thrown.
%A
The locale's full weekday name.
If the value does not contain a valid weekday, an exception of type format_­error is thrown.
%b
The locale's abbreviated month name.
If the value does not contain a valid month, an exception of type format_­error is thrown.
%B
The locale's full month name.
If the value does not contain a valid month, an exception of type format_­error is thrown.
%c
The locale's date and time representation.
The modified command %Ec produces the locale's alternate date and time representation.
%C
The year divided by 100 using floored division.
If the result is a single decimal digit, it is prefixed with 0.
The modified command %EC produces the locale's alternative representation of the century.
%d
The day of month as a decimal number.
If the result is a single decimal digit, it is prefixed with 0.
The modified command %Od produces the locale's alternative representation.
%D
Equivalent to %m/%d/%y.
%e
The day of month as a decimal number.
If the result is a single decimal digit, it is prefixed with a space.
The modified command %Oe produces the locale's alternative representation.
%F
Equivalent to %Y-%m-%d.
%g
The last two decimal digits of the ISO week-based year.
If the result is a single digit it is prefixed by 0.
%G
The ISO week-based year as a decimal number.
If the result is less than four digits it is left-padded with 0 to four digits.
%h
Equivalent to %b.
%H
The hour (24-hour clock) as a decimal number.
If the result is a single digit, it is prefixed with 0.
The modified command %OH produces the locale's alternative representation.
%I
The hour (12-hour clock) as a decimal number.
If the result is a single digit, it is prefixed with 0.
The modified command %OI produces the locale's alternative representation.
%j
If the type being formatted is a specialization of duration, the decimal number of days without padding.
Otherwise, the day of the year as a decimal number.
Jan 1 is 001.
If the result is less than three digits, it is left-padded with 0 to three digits.
%m
The month as a decimal number.
Jan is 01.
If the result is a single digit, it is prefixed with 0.
The modified command %Om produces the locale's alternative representation.
%M
The minute as a decimal number.
If the result is a single digit, it is prefixed with 0.
The modified command %OM produces the locale's alternative representation.
%n
A new-line character.
%p
The locale's equivalent of the AM/PM designations associated with a 12-hour clock.
%q
The duration's unit suffix as specified in [time.duration.io].
%Q
The duration's numeric value (as if extracted via .count()).
%r
The locale's 12-hour clock time.
%R
Equivalent to %H:%M.
%S
Seconds as a decimal number.
If the number of seconds is less than 10, the result is prefixed with 0.
If the precision of the input cannot be exactly represented with seconds, then the format is a decimal floating-point number with a fixed format and a precision matching that of the precision of the input (or to a microseconds precision if the conversion to floating-point decimal seconds cannot be made within 18 fractional digits).
The character for the decimal point is localized according to the locale.
The modified command %OS produces the locale's alternative representation.
%t
A horizontal-tab character.
%T
Equivalent to %H:%M:%S.
%u
The ISO weekday as a decimal number (1-7), where Monday is 1.
The modified command %Ou produces the locale's alternative representation.
%U
The week number of the year as a decimal number.
The first Sunday of the year is the first day of week 01.
Days of the same year prior to that are in week 00.
If the result is a single digit, it is prefixed with 0.
The modified command %OU produces the locale's alternative representation.
%V
The ISO week-based week number as a decimal number.
If the result is a single digit, it is prefixed with 0.
The modified command %OV produces the locale's alternative representation.
%w
The weekday as a decimal number (0-6), where Sunday is 0.
The modified command %Ow produces the locale's alternative representation.
%W
The week number of the year as a decimal number.
The first Monday of the year is the first day of week 01.
Days of the same year prior to that are in week 00.
If the result is a single digit, it is prefixed with 0.
The modified command %OW produces the locale's alternative representation.
%x
The locale's date representation.
The modified command %Ex produces the locale's alternate date representation.
%X
The locale's time representation.
The modified command %EX produces the locale's alternate time representation.
%y
The last two decimal digits of the year.
If the result is a single digit it is prefixed by 0.
The modified command %Oy produces the locale's alternative representation.
The modified command %Ey produces the locale's alternative representation of offset from %EC (year only).
%Y
The year as a decimal number.
If the result is less than four digits it is left-padded with 0 to four digits.
The modified command %EY produces the locale's alternative full year representation.
%z
The offset from UTC in the ISO 8601:2004 format.
For example -0430 refers to 4 hours 30 minutes behind UTC.
If the offset is zero, +0000 is used.
The modified commands %Ez and %Oz insert a : between the hours and minutes: -04:30.
If the offset information is not available, an exception of type format_­error is thrown.
%Z
The time zone abbreviation.
If the time zone abbreviation is not available, an exception of type format_­error is thrown.
%%
A % character.
6
#
If the chrono-specs is omitted, the chrono object is formatted as if by streaming it to std​::​ostringstream os and copying os.str() through the output iterator of the context with additional padding and adjustments as specified by the format specifiers.
[Example 3: string s = format("{:=>8}", 42ms); // value of s is "====42ms" — end example]
🔗
template<class Duration, class charT> struct formatter<chrono::sys_time<Duration>, charT>;
7
#
Remarks: If %Z is used, it is replaced with STATICALLY-WIDEN<charT>("UTC").
If %z (or a modified variant of %z) is used, an offset of 0min is formatted.
🔗
template<class Duration, class charT> struct formatter<chrono::utc_time<Duration>, charT>;
8
#
Remarks: If %Z is used, it is replaced with STATICALLY-WIDEN<charT>("UTC").
If %z (or a modified variant of %z) is used, an offset of 0min is formatted.
If the argument represents a time during a positive leap second insertion, and if a seconds field is formatted, the integral portion of that format is STATICALLY-WIDEN<charT>("60").
🔗
template<class Duration, class charT> struct formatter<chrono::tai_time<Duration>, charT>;
9
#
Remarks: If %Z is used, it is replaced with STATICALLY-WIDEN<charT>("TAI").
If %z (or a modified variant of %z) is used, an offset of 0min is formatted.
The date and time formatted are equivalent to those formatted by a sys_­time initialized with sys_time<Duration>{tp.time_since_epoch()} - (sys_days{1970y/January/1} - sys_days{1958y/January/1})
🔗
template<class Duration, class charT> struct formatter<chrono::gps_time<Duration>, charT>;
10
#
Remarks: If %Z is used, it is replaced with STATICALLY-WIDEN<charT>("GPS").
If %z (or a modified variant of %z) is used, an offset of 0min is formatted.
The date and time formatted are equivalent to those formatted by a sys_­time initialized with sys_time<Duration>{tp.time_since_epoch()} + (sys_days{1980y/January/Sunday[1]} - sys_days{1970y/January/1})
🔗
template<class Duration, class charT> struct formatter<chrono::file_time<Duration>, charT>;
11
#
Remarks: If %Z is used, it is replaced with STATICALLY-WIDEN<charT>("UTC").
If %z (or a modified variant of %z) is used, an offset of 0min is formatted.
The date and time formatted are equivalent to those formatted by a sys_­time initialized with clock_­cast<system_­clock>(t), or by a utc_­time initialized with clock_­cast<utc_­clock>(t), where t is the first argument to format.
🔗
template<class Duration, class charT> struct formatter<chrono::local_time<Duration>, charT>;
12
#
Remarks: If %Z, %z, or a modified version of %z is used, an exception of type format_­error is thrown.
template<class Duration> struct local-time-format-t { // exposition only local_time<Duration> time; // exposition only const string* abbrev; // exposition only const seconds* offset_sec; // exposition only };
🔗
template<class Duration> local-time-format-t<Duration> local_time_format(local_time<Duration> time, const string* abbrev = nullptr, const seconds* offset_sec = nullptr);
13
#
Returns: {time, abbrev, offset_­sec}.
🔗
template<class Duration, class charT> struct formatter<chrono::local-time-format-t<Duration>, charT>;
14
#
Let f be a local-time-format-t<Duration> object passed to formatter​::​format.
15
#
Remarks: If %Z is used, it is replaced with *f.abbrev if f.abbrev is not a null pointer value.
If %Z is used and f.abbrev is a null pointer value, an exception of type format_­error is thrown.
If %z (or a modified variant of %z) is used, it is formatted with the value of *f.offset_­sec if f.offset_­sec is not a null pointer value.
If %z (or a modified variant of %z) is used and f.offset_­sec is a null pointer value, then an exception of type format_­error is thrown.
template<class Duration, class TimeZonePtr, class charT> struct formatter<chrono::zoned_time<Duration, TimeZonePtr>, charT> : formatter<chrono::local-time-format-t<Duration>, charT> { template<class FormatContext> typename FormatContext::iterator format(const chrono::zoned_time<Duration, TimeZonePtr>& tp, FormatContext& ctx); };
🔗
template<class FormatContext> typename FormatContext::iterator format(const chrono::zoned_time<Duration, TimeZonePtr>& tp, FormatContext& ctx);
16
#
Effects: Equivalent to: sys_info info = tp.get_info(); return formatter<chrono::local-time-format-t<Duration>, charT>:: format({tp.get_local_time(), &info.abbrev, &info.offset}, ctx);