13 Templates [temp]

13.7 Template declarations [temp.decls]

A template-id, that is, the template-name followed by a template-argument-list shall not be specified in the declaration of a primary template declaration.
Example
:
template<class T1, class T2, int I> class A<T1, T2, I> { };     // error
template<class T1, int I> void sort<T1, I>(T1 data[I]);         // error
— end example
 ]
Note
:
However, this syntax is allowed in class template partial specializations.
— end note
 ]
For purposes of name lookup and instantiation, default arguments, type-constraints, requires-clauses, and noexcept-specifiers of function templates and of member functions of class templates are considered definitions; each default argument, type-constraint, requires-clause, or noexcept-specifier is a separate definition which is unrelated to the templated function definition or to any other default arguments type-constraints, requires-clauses, or noexcept-specifiers.
For the purpose of instantiation, the substatements of a constexpr if statement are considered definitions.
Because an alias-declaration cannot declare a template-id, it is not possible to partially or explicitly specialize an alias template.

13.7.1 Class templates [temp.class]

A class template defines the layout and operations for an unbounded set of related types.
Example
:
A single class template List might provide an unbounded set of class definitions: one class List<T> for every type T, each describing a linked list of elements of type T.
Similarly, a class template Array describing a contiguous, dynamic array might be defined like this:
template<class T> class Array {
  T* v;
  int sz;
public:
  explicit Array(int);
  T& operator[](int);
  T& elem(int i) { return v[i]; }
};
The prefix template<class T> specifies that a template is being declared and that a type-name T may be used in the declaration.
In other words, Array is a parameterized type with T as its parameter.
— end example
 ]
When a member function, a member class, a member enumeration, a static data member or a member template of a class template is defined outside of the class template definition, the member definition is defined as a template definition in which the template-head is equivalent to that of the class template ([temp.over.link]).
The names of the template parameters used in the definition of the member may be different from the template parameter names used in the class template definition.
The template argument list following the class template name in the member definition shall name the parameters in the same order as the one used in the template parameter list of the member.
Each template parameter pack shall be expanded with an ellipsis in the template argument list.
Example
:
template<class T1, class T2> struct A {
  void f1();
  void f2();
};

template<class T2, class T1> void A<T2,T1>::f1() { }    // OK
template<class T2, class T1> void A<T1,T2>::f2() { }    // error
template<class ... Types> struct B {
  void f3();
  void f4();
};

template<class ... Types> void B<Types ...>::f3() { }   // OK
template<class ... Types> void B<Types>::f4() { }       // error
template<typename T> concept C = true;
template<typename T> concept D = true;

template<C T> struct S {
  void f();
  void g();
  void h();
  template<D U> struct Inner;
};

template<C A> void S<A>::f() { }        // OK: template-heads match
template<typename T> void S<T>::g() { } // error: no matching declaration for S<T>

template<typename T> requires C<T>      // ill-formed, no diagnostic required: template-heads are
void S<T>::h() { }                      // functionally equivalent but not equivalent

template<C X> template<D Y>
struct S<X>::Inner { };                 // OK
— end example
 ]
In a redeclaration, partial specialization, explicit specialization or explicit instantiation of a class template, the class-key shall agree in kind with the original class template declaration ([dcl.type.elab]).

13.7.1.1 Member functions of class templates [temp.mem.func]

A member function of a class template may be defined outside of the class template definition in which it is declared.
Example
:
template<class T> class Array {
  T* v;
  int sz;
public:
  explicit Array(int);
  T& operator[](int);
  T& elem(int i) { return v[i]; }
};
declares three member functions of a class template.
The subscript function might be defined like this:
template<class T> T& Array<T>::operator[](int i) {
  if (i<0 || sz<=i) error("Array: range error");
  return v[i];
}
A constrained member function can be defined out of line:
template<typename T> concept C = requires {
  typename T::type;
};

template<typename T> struct S {
  void f() requires C<T>;
  void g() requires C<T>;
};

template<typename T>
  void S<T>::f() requires C<T> { }      // OK
template<typename T>
  void S<T>::g() { }                    // error: no matching function in S<T>
— end example
 ]
The template-arguments for a member function of a class template are determined by the template-arguments of the type of the object for which the member function is called.
Example
:
The template-argument for Array<T>​::​operator[] will be determined by the Array to which the subscripting operation is applied.
Array<int> v1(20);
Array<dcomplex> v2(30);

v1[3] = 7;                              // Array<int>​::​operator[]
v2[3] = dcomplex(7,8);                  // Array<dcomplex>​::​operator[]
— end example
 ]

13.7.1.2 Deduction guides [temp.deduct.guide]

Deduction guides are used when a template-name appears as a type specifier for a deduced class type ([dcl.type.class.deduct]).
Deduction guides are not found by name lookup.
Instead, when performing class template argument deduction ([over.match.class.deduct]), any deduction guides declared for the class template are considered.
deduction-guide:
	explicit-specifier template-name ( parameter-declaration-clause ) -> simple-template-id ;
Example
:
template<class T, class D = int>
struct S {
  T data;
};
template<class U>
S(U) -> S<typename U::type>;

struct A {
  using type = short;
  operator type();
};
S x{A()};           // x is of type S<short, int>
— end example
 ]
The same restrictions apply to the parameter-declaration-clause of a deduction guide as in a function declaration ([dcl.fct]).
The simple-template-id shall name a class template specialization.
The template-name shall be the same identifier as the template-name of the simple-template-id.
A deduction-guide shall be declared in the same scope as the corresponding class template and, for a member class template, with the same access.
Two deduction guide declarations in the same translation unit for the same class template shall not have equivalent parameter-declaration-clauses.

13.7.1.3 Member classes of class templates [temp.mem.class]

A member class of a class template may be defined outside the class template definition in which it is declared.
Note
:
The member class must be defined before its first use that requires an instantiation ([temp.inst]).
For example,
template<class T> struct A {
  class B;
};
A<int>::B* b1;                          // OK: requires A to be defined but not A​::​B
template<class T> class A<T>::B { };
A<int>::B  b2;                          // OK: requires A​::​B to be defined
— end note
 ]

13.7.1.4 Static data members of class templates [temp.static]

A definition for a static data member or static data member template may be provided in a namespace scope enclosing the definition of the static member's class template.
Example
:
template<class T> class X {
  static T s;
};
template<class T> T X<T>::s = 0;

struct limits {
  template<class T>
    static const T min;                 // declaration
};

template<class T>
  const T limits::min = { };            // definition
— end example
 ]
An explicit specialization of a static data member declared as an array of unknown bound can have a different bound from its definition, if any.
Example
:
template <class T> struct A {
  static int i[];
};
template <class T> int A<T>::i[4];      // 4 elements
template <> int A<int>::i[] = { 1 };    // OK: 1 element
— end example
 ]

13.7.1.5 Enumeration members of class templates [temp.mem.enum]

An enumeration member of a class template may be defined outside the class template definition.
Example
:
template<class T> struct A {
  enum E : T;
};
A<int> a;
template<class T> enum A<T>::E : T { e1, e2 };
A<int>::E e = A<int>::e1;
— end example
 ]

13.7.2 Member templates [temp.mem]

A template can be declared within a class or class template; such a template is called a member template.
A member template can be defined within or outside its class definition or class template definition.
A member template of a class template that is defined outside of its class template definition shall be specified with a template-head equivalent to that of the class template followed by a template-head equivalent to that of the member template ([temp.over.link]).
Example
:
template<class T> struct string {
  template<class T2> int compare(const T2&);
  template<class T2> string(const string<T2>& s) { /* ... */ }
};

template<class T> template<class T2> int string<T>::compare(const T2& s) {
}
— end example
 ]
Example
:
template<typename T> concept C1 = true;
template<typename T> concept C2 = sizeof(T) <= 4;

template<C1 T> struct S {
  template<C2 U> void f(U);
  template<C2 U> void g(U);
};

template<C1 T> template<C2 U>
void S<T>::f(U) { }             // OK
template<C1 T> template<typename U>
void S<T>::g(U) { }             // error: no matching function in S<T>
— end example
 ]
A local class of non-closure type shall not have member templates.
Access control rules apply to member template names.
A destructor shall not be a member template.
A non-template member function ([dcl.fct]) with a given name and type and a member function template of the same name, which could be used to generate a specialization of the same type, can both be declared in a class.
When both exist, a use of that name and type refers to the non-template member unless an explicit template argument list is supplied.
Example
:
template <class T> struct A {
  void f(int);
  template <class T2> void f(T2);
};

template <> void A<int>::f(int) { }                 // non-template member function
template <> template <> void A<int>::f<>(int) { }   // member function template specialization

int main() {
  A<char> ac;
  ac.f(1);                                          // non-template
  ac.f('c');                                        // template
  ac.f<>(1);                                        // template
}
— end example
 ]
A member function template shall not be virtual.
Example
:
template <class T> struct AA {
  template <class C> virtual void g(C);             // error
  virtual void f();                                 // OK
};
— end example
 ]
A specialization of a member function template does not override a virtual function from a base class.
Example
:
class B {
  virtual void f(int);
};

class D : public B {
  template <class T> void f(T); // does not override B​::​f(int)
  void f(int i) { f<>(i); }     // overriding function that calls the template instantiation
};
— end example
 ]
A specialization of a conversion function template is referenced in the same way as a non-template conversion function that converts to the same type.
Example
:
struct A {
  template <class T> operator T*();
};
template <class T> A::operator T*(){ return 0; }
template <> A::operator char*(){ return 0; }        // specialization
template A::operator void*();                       // explicit instantiation

int main() {
  A a;
  int* ip;
  ip = a.operator int*();       // explicit call to template operator A​::​operator int*()
}
— end example
 ]
Note
:
There is no syntax to form a template-id by providing an explicit template argument list ([temp.arg.explicit]) for a conversion function template ([class.conv.fct]).
— end note
 ]
A specialization of a conversion function template is not found by name lookup.
Instead, any conversion function templates visible in the context of the use are considered.
For each such operator, if argument deduction succeeds ([temp.deduct.conv]), the resulting specialization is used as if found by name lookup.
A using-declaration in a derived class cannot refer to a specialization of a conversion function template in a base class.
Overload resolution and partial ordering are used to select the best conversion function among multiple specializations of conversion function templates and/or non-template conversion functions.

13.7.3 Variadic templates [temp.variadic]

A template parameter pack is a template parameter that accepts zero or more template arguments.
Example
:
template<class ... Types> struct Tuple { };

Tuple<> t0;                     // Types contains no arguments
Tuple<int> t1;                  // Types contains one argument: int
Tuple<int, float> t2;           // Types contains two arguments: int and float
Tuple<0> error;                 // error: 0 is not a type
— end example
 ]
A function parameter pack is a function parameter that accepts zero or more function arguments.
Example
:
template<class ... Types> void f(Types ... args);

f();                            // args contains no arguments
f(1);                           // args contains one argument: int
f(2, 1.0);                      // args contains two arguments: int and double
— end example
 ]
An init-capture pack is a lambda capture that introduces an init-capture for each of the elements in the pack expansion of its initializer.
Example
:
template <typename... Args>
void foo(Args... args) {
    [...xs=args]{
        bar(xs...);             // xs is an init-capture pack
    };
}

foo();                          // xs contains zero init-captures
foo(1);                         // xs contains one init-capture
— end example
 ]
A pack is a template parameter pack, a function parameter pack, or an init-capture pack.
The number of elements of a template parameter pack or a function parameter pack is the number of arguments provided for the parameter pack.
The number of elements of an init-capture pack is the number of elements in the pack expansion of its initializer.
A pack expansion consists of a pattern and an ellipsis, the instantiation of which produces zero or more instantiations of the pattern in a list (described below).
The form of the pattern depends on the context in which the expansion occurs.
Pack expansions can occur in the following contexts:
Example
:
template<class ... Types> void f(Types ... rest);
template<class ... Types> void g(Types ... rest) {
  f(&rest ...);     // “&rest ...” is a pack expansion; “&rest” is its pattern
}
— end example
 ]
For the purpose of determining whether a pack satisfies a rule regarding entities other than packs, the pack is considered to be the entity that would result from an instantiation of the pattern in which it appears.
A pack whose name appears within the pattern of a pack expansion is expanded by that pack expansion.
An appearance of the name of a pack is only expanded by the innermost enclosing pack expansion.
The pattern of a pack expansion shall name one or more packs that are not expanded by a nested pack expansion; such packs are called unexpanded packs in the pattern.
All of the packs expanded by a pack expansion shall have the same number of arguments specified.
An appearance of a name of a pack that is not expanded is ill-formed.
Example
:
template<typename...> struct Tuple {};
template<typename T1, typename T2> struct Pair {};

template<class ... Args1> struct zip {
  template<class ... Args2> struct with {
    typedef Tuple<Pair<Args1, Args2> ... > type;
  };
};

typedef zip<short, int>::with<unsigned short, unsigned>::type T1;
    // T1 is Tuple<Pair<short, unsigned short>, Pair<int, unsigned>>
typedef zip<short>::with<unsigned short, unsigned>::type T2;
    // error: different number of arguments specified for Args1 and Args2

template<class ... Args>
  void g(Args ... args) {                   // OK: Args is expanded by the function parameter pack args
    f(const_cast<const Args*>(&args)...);   // OK: “Args” and “args” are expanded
    f(5 ...);                               // error: pattern does not contain any packs
    f(args);                                // error: pack “args” is not expanded
    f(h(args ...) + args ...);              // OK: first “args” expanded within h,
                                            // second “args” expanded within f
  }
— end example
 ]
The instantiation of a pack expansion that is neither a sizeof... expression nor a fold-expression produces a list of elements , where N is the number of elements in the pack expansion parameters.
Each is generated by instantiating the pattern and replacing each pack expansion parameter with its element.
Such an element, in the context of the instantiation, is interpreted as follows:
  • if the pack is a template parameter pack, the element is a template parameter ([temp.param]) of the corresponding kind (type or non-type) designating the corresponding type or value template argument;
  • if the pack is a function parameter pack, the element is an id-expression designating the function parameter that resulted from instantiation of the function parameter pack declaration; otherwise
  • if the pack is an init-capture pack, the element is an id-expression designating the variable introduced by the init-capture that resulted from instantiation of the init-capture pack.
All of the become items in the enclosing list.
Note
:
The variety of list varies with the context: expression-list, base-specifier-list, template-argument-list, etc.
— end note
 ]
When N is zero, the instantiation of the expansion produces an empty list.
Such an instantiation does not alter the syntactic interpretation of the enclosing construct, even in cases where omitting the list entirely would otherwise be ill-formed or would result in an ambiguity in the grammar.
Example
:
template<class... T> struct X : T... { };
template<class... T> void f(T... values) {
  X<T...> x(values...);
}

template void f<>();    // OK: X<> has no base classes
                        // x is a variable of type X<> that is value-initialized
— end example
 ]
The instantiation of a sizeof... expression ([expr.sizeof]) produces an integral constant containing the number of elements in the pack it expands.
The instantiation of a fold-expression produces:
  • (( op ) op ) op for a unary left fold,
  • op ( op ( op )) for a unary right fold,
  • (((E op ) op ) op ) op for a binary left fold, and
  • op ( op ( op ( op E))) for a binary right fold.
In each case, op is the fold-operator, N is the number of elements in the pack expansion parameters, and each is generated by instantiating the pattern and replacing each pack expansion parameter with its element.
For a binary fold-expression, E is generated by instantiating the cast-expression that did not contain an unexpanded pack.
Example
:
template<typename ...Args>
  bool all(Args ...args) { return (... && args); }

bool b = all(true, true, true, false);
Within the instantiation of all, the returned expression expands to ((true && true) && true) && false, which evaluates to false.
— end example
 ]
If N is zero for a unary fold-expression, the value of the expression is shown in Table 17; if the operator is not listed in Table 17, the instantiation is ill-formed.
Table 17: Value of folding empty sequences   [tab:temp.fold.empty]
Operator
Value when pack is empty
&&
true
||
false
,
void()

13.7.4 Friends [temp.friend]

A friend of a class or class template can be a function template or class template, a specialization of a function template or class template, or a non-template function or class.
For a friend function declaration that is not a template declaration:
  • if the name of the friend is a qualified or unqualified template-id, the friend declaration refers to a specialization of a function template, otherwise,
  • if the name of the friend is a qualified-id and a matching non-template function is found in the specified class or namespace, the friend declaration refers to that function, otherwise,
  • if the name of the friend is a qualified-id and a matching function template is found in the specified class or namespace, the friend declaration refers to the deduced specialization of that function template ([temp.deduct.decl]), otherwise,
  • the name shall be an unqualified-id that declares (or redeclares) a non-template function.
Example
:
template<class T> class task;
template<class T> task<T>* preempt(task<T>*);

template<class T> class task {
  friend void next_time();
  friend void process(task<T>*);
  friend task<T>* preempt<T>(task<T>*);
  template<class C> friend int func(C);

  friend class task<int>;
  template<class P> friend class frd;
};
Here, each specialization of the task class template has the function next_­time as a friend; because process does not have explicit template-arguments, each specialization of the task class template has an appropriately typed function process as a friend, and this friend is not a function template specialization; because the friend preempt has an explicit template-argument T, each specialization of the task class template has the appropriate specialization of the function template preempt as a friend; and each specialization of the task class template has all specializations of the function template func as friends.
Similarly, each specialization of the task class template has the class template specialization task<int> as a friend, and has all specializations of the class template frd as friends.
— end example
 ]
A friend template may be declared within a class or class template.
A friend function template may be defined within a class or class template, but a friend class template may not be defined in a class or class template.
In these cases, all specializations of the friend class or friend function template are friends of the class or class template granting friendship.
Example
:
class A {
  template<class T> friend class B;                 // OK
  template<class T> friend void f(T){ /* ... */ }   // OK
};
— end example
 ]
A template friend declaration specifies that all specializations of that template, whether they are implicitly instantiated, partially specialized or explicitly specialized, are friends of the class containing the template friend declaration.
Example
:
class X {
  template<class T> friend struct A;
  class Y { };
};

template<class T> struct A { X::Y ab; };            // OK
template<class T> struct A<T*> { X::Y ab; };        // OK
— end example
 ]
A template friend declaration may declare a member of a dependent type to be a friend.
The friend declaration shall declare a function or specify a type with an elaborated-type-specifier, in either case with a nested-name-specifier ending with a simple-template-id, C, whose template-name names a class template.
The template parameters of the template friend declaration shall be deducible from C ([temp.deduct.type]).
In this case, a member of a specialization S of the class template is a friend of the class granting friendship if deduction of the template parameters of C from S succeeds, and substituting the deduced template arguments into the friend declaration produces a declaration that would be a valid redeclaration of the member of the specialization.
Example
:
template<class T> struct A {
  struct B { };
  void f();
  struct D {
    void g();
  };
  T h();
  template<T U> T i();
};
template<> struct A<int> {
  struct B { };
  int f();
  struct D {
    void g();
  };
  template<int U> int i();
};
template<> struct A<float*> {
  int *h();
};

class C {
  template<class T> friend struct A<T>::B;      // grants friendship to A<int>​::​B even though
                                                // it is not a specialization of A<T>​::​B
  template<class T> friend void A<T>::f();      // does not grant friendship to A<int>​::​f()
                                                // because its return type does not match
  template<class T> friend void A<T>::D::g();   // error: A<T>​::​D does not end with a simple-template-id
  template<class T> friend int *A<T*>::h();     // grants friendship to A<int*>​::​h() and A<float*>​::​h()
  template<class T> template<T U>               // grants friendship to instantiations of A<T>​::​i() and
    friend T A<T>::i();                         // to A<int>​::​i(), and thereby to all specializations
};                                              // of those function templates
— end example
 ]
Note
:
A friend declaration may first declare a member of an enclosing namespace scope ([temp.inject]).
— end note
 ]
A friend template shall not be declared in a local class.
Friend declarations shall not declare partial specializations.
Example
:
template<class T> class A { };
class X {
  template<class T> friend class A<T*>;         // error
};
— end example
 ]
When a friend declaration refers to a specialization of a function template, the function parameter declarations shall not include default arguments, nor shall the inline, constexpr, or consteval specifiers be used in such a declaration.
A non-template friend declaration with a requires-clause shall be a definition.
A friend function template with a constraint that depends on a template parameter from an enclosing template shall be a definition.
Such a constrained friend function or function template declaration does not declare the same function or function template as a declaration in any other scope.

13.7.5 Class template partial specializations [temp.class.spec]

A primary class template declaration is one in which the class template name is an identifier.
A template declaration in which the class template name is a simple-template-id is a partial specialization of the class template named in the simple-template-id.
A partial specialization of a class template provides an alternative definition of the template that is used instead of the primary definition when the arguments in a specialization match those given in the partial specialization ([temp.class.spec.match]).
The primary template shall be declared before any specializations of that template.
A partial specialization shall be declared before the first use of a class template specialization that would make use of the partial specialization as the result of an implicit or explicit instantiation in every translation unit in which such a use occurs; no diagnostic is required.
Each class template partial specialization is a distinct template and definitions shall be provided for the members of a template partial specialization ([temp.class.spec.mfunc]).
Example
:
template<class T1, class T2, int I> class A             { };
template<class T, int I>            class A<T, T*, I>   { };
template<class T1, class T2, int I> class A<T1*, T2, I> { };
template<class T>                   class A<int, T*, 5> { };
template<class T1, class T2, int I> class A<T1, T2*, I> { };
The first declaration declares the primary (unspecialized) class template.
The second and subsequent declarations declare partial specializations of the primary template.
— end example
 ]
A class template partial specialization may be constrained ([temp.pre]).
Example
:
template<typename T> concept C = true;

template<typename T> struct X { };
template<typename T> struct X<T*> { };          // #1
template<C T> struct X<T> { };                  // #2
Both partial specializations are more specialized than the primary template.
#1 is more specialized because the deduction of its template arguments from the template argument list of the class template specialization succeeds, while the reverse does not.
#2 is more specialized because the template arguments are equivalent, but the partial specialization is more constrained ([temp.constr.order]).
— end example
 ]
The template parameters are specified in the angle bracket enclosed list that immediately follows the keyword template.
For partial specializations, the template argument list is explicitly written immediately following the class template name.
For primary templates, this list is implicitly described by the template parameter list.
Specifically, the order of the template arguments is the sequence in which they appear in the template parameter list.
Example
:
The template argument list for the primary template in the example above is <T1, T2, I>.
— end example
 ]
Note
:
The template argument list cannot be specified in the primary template declaration.
For example,
template<class T1, class T2, int I>
class A<T1, T2, I> { };                         // error
— end note
 ]
A class template partial specialization may be declared in any scope in which the corresponding primary template may be defined ([namespace.memdef], [class.mem], [temp.mem]).
Example
:
template<class T> struct A {
  struct C {
    template<class T2> struct B { };
    template<class T2> struct B<T2**> { };      // partial specialization #1
  };
};

// partial specialization of A<T>​::​C​::​B<T2>
template<class T> template<class T2>
  struct A<T>::C::B<T2*> { };                   // #2

A<short>::C::B<int*> absip;                     // uses partial specialization #2
— end example
 ]
Partial specialization declarations themselves are not found by name lookup.
Rather, when the primary template name is used, any previously-declared partial specializations of the primary template are also considered.
One consequence is that a using-declaration which refers to a class template does not restrict the set of partial specializations which may be found through the using-declaration.
Example
:
namespace N {
  template<class T1, class T2> class A { };     // primary template
}

using N::A;                                     // refers to the primary template

namespace N {
  template<class T> class A<T, T*> { };         // partial specialization
}

A<int,int*> a;      // uses the partial specialization, which is found through the using-declaration
                    // which refers to the primary template
— end example
 ]
A non-type argument is non-specialized if it is the name of a non-type parameter.
All other non-type arguments are specialized.
Within the argument list of a class template partial specialization, the following restrictions apply:
  • The type of a template parameter corresponding to a specialized non-type argument shall not be dependent on a parameter of the specialization.
    Example
    :
    template <class T, T t> struct C {};
    template <class T> struct C<T, 1>;              // error
    
    template< int X, int (*array_ptr)[X] > class A {};
    int array[5];
    template< int X > class A<X,&array> { };        // error
    
    — end example
     ]
  • The specialization shall be more specialized than the primary template.
  • The template parameter list of a specialization shall not contain default template argument values.134
  • An argument shall not contain an unexpanded pack.
    If an argument is a pack expansion ([temp.variadic]), it shall be the last argument in the template argument list.
The usual access checking rules do not apply to non-dependent names used to specify template arguments of the simple-template-id of the partial specialization.
Note
:
The template arguments may be private types or objects that would normally not be accessible.
Dependent names cannot be checked when declaring the partial specialization, but will be checked when substituting into the partial specialization.
— end note
 ]
There is no way in which they could be used.

13.7.5.1 Matching of class template partial specializations [temp.class.spec.match]

When a class template is used in a context that requires an instantiation of the class, it is necessary to determine whether the instantiation is to be generated using the primary template or one of the partial specializations.
This is done by matching the template arguments of the class template specialization with the template argument lists of the partial specializations.
  • If exactly one matching specialization is found, the instantiation is generated from that specialization.
  • If more than one matching specialization is found, the partial order rules are used to determine whether one of the specializations is more specialized than the others.
    If none of the specializations is more specialized than all of the other matching specializations, then the use of the class template is ambiguous and the program is ill-formed.
  • If no matches are found, the instantiation is generated from the primary template.
A partial specialization matches a given actual template argument list if the template arguments of the partial specialization can be deduced from the actual template argument list, and the deduced template arguments satisfy the associated constraints of the partial specialization, if any.
Example
:
template<class T1, class T2, int I> class A             { };    // #1
template<class T, int I>            class A<T, T*, I>   { };    // #2
template<class T1, class T2, int I> class A<T1*, T2, I> { };    // #3
template<class T>                   class A<int, T*, 5> { };    // #4
template<class T1, class T2, int I> class A<T1, T2*, I> { };    // #5

A<int, int, 1>   a1;                    // uses #1
A<int, int*, 1>  a2;                    // uses #2, T is int, I is 1
A<int, char*, 5> a3;                    // uses #4, T is char
A<int, char*, 1> a4;                    // uses #5, T1 is int, T2 is char, I is 1
A<int*, int*, 2> a5;                    // ambiguous: matches #3 and #5
— end example
 ]
Example
:
template<typename T> concept C = requires (T t) { t.f(); };

template<typename T> struct S { };      // #1
template<C T> struct S<T> { };          // #2

struct Arg { void f(); };

S<int> s1;                              // uses #1; the constraints of #2 are not satisfied
S<Arg> s2;                              // uses #2; both constraints are satisfied but #2 is more specialized
— end example
 ]
If the template arguments of a partial specialization cannot be deduced because of the structure of its template-parameter-list and the template-id, the program is ill-formed.
Example
:
template <int I, int J> struct A {};
template <int I> struct A<I+5, I*2> {};     // error

template <int I> struct A<I, I> {};         // OK

template <int I, int J, int K> struct B {};
template <int I> struct B<I, I*2, 2> {};    // OK
— end example
 ]
In a type name that refers to a class template specialization, (e.g., A<int, int, 1>) the argument list shall match the template parameter list of the primary template.
The template arguments of a specialization are deduced from the arguments of the primary template.

13.7.5.2 Partial ordering of class template specializations [temp.class.order]

For two class template partial specializations, the first is more specialized than the second if, given the following rewrite to two function templates, the first function template is more specialized than the second according to the ordering rules for function templates:
  • Each of the two function templates has the same template parameters and associated constraints as the corresponding partial specialization.
  • Each function template has a single function parameter whose type is a class template specialization where the template arguments are the corresponding template parameters from the function template for each template argument in the template-argument-list of the simple-template-id of the partial specialization.
Example
:
template<int I, int J, class T> class X { };
template<int I, int J>          class X<I, J, int> { };         // #1
template<int I>                 class X<I, I, int> { };         // #2

template<int I0, int J0> void f(X<I0, J0, int>);                // A
template<int I0>         void f(X<I0, I0, int>);                // B

template <auto v>    class Y { };
template <auto* p>   class Y<p> { };                            // #3
template <auto** pp> class Y<pp> { };                           // #4

template <auto* p0>   void g(Y<p0>);                            // C
template <auto** pp0> void g(Y<pp0>);                           // D
According to the ordering rules for function templates, the function template B is more specialized than the function template A and the function template D is more specialized than the function template C.
Therefore, the partial specialization #2 is more specialized than the partial specialization #1 and the partial specialization #4 is more specialized than the partial specialization #3.
— end example
 ]
Example
:
template<typename T> concept C = requires (T t) { t.f(); };
template<typename T> concept D = C<T> && requires (T t) { t.f(); };

template<typename T> class S { };
template<C T> class S<T> { };   // #1
template<D T> class S<T> { };   // #2

template<C T> void f(S<T>);     // A
template<D T> void f(S<T>);     // B
The partial specialization #2 is more specialized than #1 because B is more specialized than A.
— end example
 ]

13.7.5.3 Members of class template specializations [temp.class.spec.mfunc]

The template parameter list of a member of a class template partial specialization shall match the template parameter list of the class template partial specialization.
The template argument list of a member of a class template partial specialization shall match the template argument list of the class template partial specialization.
A class template partial specialization is a distinct template.
The members of the class template partial specialization are unrelated to the members of the primary template.
Class template partial specialization members that are used in a way that requires a definition shall be defined; the definitions of members of the primary template are never used as definitions for members of a class template partial specialization.
An explicit specialization of a member of a class template partial specialization is declared in the same way as an explicit specialization of the primary template.
Example
:
// primary class template
template<class T, int I> struct A {
  void f();
};

// member of primary class template
template<class T, int I> void A<T,I>::f() { }

// class template partial specialization
template<class T> struct A<T,2> {
  void f();
  void g();
  void h();
};

// member of class template partial specialization
template<class T> void A<T,2>::g() { }

// explicit specialization
template<> void A<char,2>::h() { }

int main() {
  A<char,0> a0;
  A<char,2> a2;
  a0.f();           // OK, uses definition of primary template's member
  a2.g();           // OK, uses definition of partial specialization's member
  a2.h();           // OK, uses definition of explicit specialization's member
  a2.f();           // error: no definition of f for A<T,2>; the primary template is not used here
}
— end example
 ]
If a member template of a class template is partially specialized, the member template partial specializations are member templates of the enclosing class template; if the enclosing class template is instantiated ([temp.inst], [temp.explicit]), a declaration for every member template partial specialization is also instantiated as part of creating the members of the class template specialization.
If the primary member template is explicitly specialized for a given (implicit) specialization of the enclosing class template, the partial specializations of the member template are ignored for this specialization of the enclosing class template.
If a partial specialization of the member template is explicitly specialized for a given (implicit) specialization of the enclosing class template, the primary member template and its other partial specializations are still considered for this specialization of the enclosing class template.
Example
:
template<class T> struct A {
  template<class T2> struct B {};                               // #1
  template<class T2> struct B<T2*> {};                          // #2
};

template<> template<class T2> struct A<short>::B {};            // #3

A<char>::B<int*>  abcip;                                        // uses #2
A<short>::B<int*> absip;                                        // uses #3
A<char>::B<int>  abci;                                          // uses #1
— end example
 ]

13.7.6 Function templates [temp.fct]

A function template defines an unbounded set of related functions.
Example
:
A family of sort functions might be declared like this:
template<class T> class Array { };
template<class T> void sort(Array<T>&);
— end example
 ]
A function template can be overloaded with other function templates and with non-template functions ([dcl.fct]).
A non-template function is not related to a function template (i.e., it is never considered to be a specialization), even if it has the same name and type as a potentially generated function template specialization.135
That is, declarations of non-template functions do not merely guide overload resolution of function template specializations with the same name.
If such a non-template function is odr-used in a program, it must be defined; it will not be implicitly instantiated using the function template definition.

13.7.6.2 Partial ordering of function templates [temp.func.order]

If a function template is overloaded, the use of a function template specialization might be ambiguous because template argument deduction may associate the function template specialization with more than one function template declaration.
Partial ordering of overloaded function template declarations is used in the following contexts to select the function template to which a function template specialization refers:
Partial ordering selects which of two function templates is more specialized than the other by transforming each template in turn (see next paragraph) and performing template argument deduction using the function type.
The deduction process determines whether one of the templates is more specialized than the other.
If so, the more specialized template is the one chosen by the partial ordering process.
If both deductions succeed, the partial ordering selects the more constrained template (if one exists) as determined below.
To produce the transformed template, for each type, non-type, or template template parameter (including template parameter packs thereof) synthesize a unique type, value, or class template respectively and substitute it for each occurrence of that parameter in the function type of the template.
Note
:
The type replacing the placeholder in the type of the value synthesized for a non-type template parameter is also a unique synthesized type.
— end note
 ]
Each function template M that is a member function is considered to have a new first parameter of type X(M), described below, inserted in its function parameter list.
If exactly one of the function templates was considered by overload resolution via a rewritten candidate ([over.match.oper]) with a reversed order of parameters, then the order of the function parameters in its transformed template is reversed.
For a function template M with cv-qualifiers cv that is a member of a class A:
  • The type X(M) is “rvalue reference to cv A” if the optional ref-qualifier of M is && or if M has no ref-qualifier and the positionally-corresponding parameter of the other transformed template has rvalue reference type; if this determination depends recursively upon whether X(M) is an rvalue reference type, it is not considered to have rvalue reference type.
  • Otherwise, X(M) is “lvalue reference to cv A.
Note
:
This allows a non-static member to be ordered with respect to a non-member function and for the results to be equivalent to the ordering of two equivalent non-members.
— end note
 ]
Example
:
struct A { };
template<class T> struct B {
  template<class R> int operator*(R&);              // #1
};

template<class T, class R> int operator*(T&, R&);   // #2

// The declaration of B​::​operator* is transformed into the equivalent of
// template<class R> int operator*(B<A>&, R&);      // #1a

int main() {
  A a;
  B<A> b;
  b * a;                                            // calls #1
}
— end example
 ]
Using the transformed function template's function type, perform type deduction against the other template as described in [temp.deduct.partial].
Example
:
template<class T> struct A { A(); };

template<class T> void f(T);
template<class T> void f(T*);
template<class T> void f(const T*);

template<class T> void g(T);
template<class T> void g(T&);

template<class T> void h(const T&);
template<class T> void h(A<T>&);

void m() {
  const int* p;
  f(p);             // f(const T*) is more specialized than f(T) or f(T*)
  float x;
  g(x);             // ambiguous: g(T) or g(T&)
  A<int> z;
  h(z);             // overload resolution selects h(A<T>&)
  const A<int> z2;
  h(z2);            // h(const T&) is called because h(A<T>&) is not callable
}
— end example
 ]
Note
:
Since, in a call context, such type deduction considers only parameters for which there are explicit call arguments, some parameters are ignored (namely, function parameter packs, parameters with default arguments, and ellipsis parameters).
Example
:
template<class T> void f(T);                            // #1
template<class T> void f(T*, int=1);                    // #2
template<class T> void g(T);                            // #3
template<class T> void g(T*, ...);                      // #4

int main() {
  int* ip;
  f(ip);                                                // calls #2
  g(ip);                                                // calls #4
}
— end example
 ]
Example
:
template<class T, class U> struct A { };

template<class T, class U> void f(U, A<U, T>* p = 0);   // #1
template<         class U> void f(U, A<U, U>* p = 0);   // #2
template<class T         > void g(T, T = T());          // #3
template<class T, class... U> void g(T, U ...);         // #4

void h() {
  f<int>(42, (A<int, int>*)0);                          // calls #2
  f<int>(42);                                           // error: ambiguous
  g(42);                                                // error: ambiguous
}
— end example
 ]
Example
:
template<class T, class... U> void f(T, U...);          // #1
template<class T            > void f(T);                // #2
template<class T, class... U> void g(T*, U...);         // #3
template<class T            > void g(T);                // #4

void h(int i) {
  f(&i);                                                // OK: calls #2
  g(&i);                                                // OK: calls #3
}
— end example
 ]
— end note
 ]
If deduction against the other template succeeds for both transformed templates, constraints can be considered as follows:
  • If their template-parameter-lists (possibly including template-parameters invented for an abbreviated function template ([dcl.fct])) or function parameter lists differ in length, neither template is more specialized than the other.
  • Otherwise:
    • If exactly one of the templates was considered by overload resolution via a rewritten candidate with reversed order of parameters:
      • If, for either template, some of the template parameters are not deducible from their function parameters, neither template is more specialized than the other.
      • If there is either no reordering or more than one reordering of the associated template-parameter-list such that neither template is more specialized than the other.
    • Otherwise, if the corresponding template-parameters of the template-parameter-lists are not equivalent ([temp.over.link]) or if the function parameters that positionally correspond between the two templates are not of the same type, neither template is more specialized than the other.
  • Otherwise, if the context in which the partial ordering is done is that of a call to a conversion function and the return types of the templates are not the same, then neither template is more specialized than the other.
  • Otherwise, if one template is more constrained than the other ([temp.constr.order]), the more constrained template is more specialized than the other.
  • Otherwise, neither template is more specialized than the other.
Example
:
template <typename> constexpr bool True = true;
template <typename T> concept C = True<T>;

void f(C auto &, auto &) = delete;
template <C Q> void f(Q &, C auto &);

void g(struct A *ap, struct B *bp) {
  f(*ap, *bp);                  // OK: Can use different methods to produce template parameters
}

template <typename T, typename U> struct X {};

template <typename T, C U, typename V> bool operator==(X<T, U>, V) = delete;
template <C T, C U, C V>               bool operator==(T, X<U, V>);

void h() {
  X<void *, int>{} == 0;        // OK: Correspondence of [T, U, V] and [U, V, T]
}
— end example
 ]

13.7.7 Alias templates [temp.alias]

An alias template is a name for a family of types.
The name of the alias template is a template-name.
When a template-id refers to the specialization of an alias template, it is equivalent to the associated type obtained by substitution of its template-arguments for the template-parameters in the defining-type-id of the alias template.
Note
:
An alias template name is never deduced.
— end note
 ]
Example
:
template<class T> struct Alloc { /* ... */ };
template<class T> using Vec = vector<T, Alloc<T>>;
Vec<int> v;         // same as vector<int, Alloc<int>> v;

template<class T>
  void process(Vec<T>& v)
  { /* ... */ }

template<class T>
  void process(vector<T, Alloc<T>>& w)
  { /* ... */ }     // error: redefinition

template<template<class> class TT>
  void f(TT<int>);

f(v);               // error: Vec not deduced

template<template<class,class> class TT>
  void g(TT<int, Alloc<int>>);
g(v);               // OK: TT = vector
— end example
 ]
However, if the template-id is dependent, subsequent template argument substitution still applies to the template-id.
Example
:
template<typename...> using void_t = void;
template<typename T> void_t<typename T::foo> f();
f<int>();           // error: int does not have a nested type foo
— end example
 ]
The defining-type-id in an alias template declaration shall not refer to the alias template being declared.
The type produced by an alias template specialization shall not directly or indirectly make use of that specialization.
Example
:
template <class T> struct A;
template <class T> using B = typename A<T>::U;
template <class T> struct A {
  typedef B<T> U;
};
B<short> b;         // error: instantiation of B<short> uses own type via A<short>​::​U
— end example
 ]
The type of a lambda-expression appearing in an alias template declaration is different between instantiations of that template, even when the lambda-expression is not dependent.
Example
:
template <class T>
  using A = decltype([] { });   // A<int> and A<char> refer to different closure types
— end example
 ]

13.7.8 Concept definitions [temp.concept]

A concept is a template that defines constraints on its template arguments.
concept-definition:
	concept concept-name = constraint-expression ;
concept-name:
	identifier
A concept-definition declares a concept.
Its identifier becomes a concept-name referring to that concept within its scope.
Example
:
template<typename T>
concept C = requires(T x) {
  { x == x } -> std::convertible_to<bool>;
};

template<typename T>
  requires C<T>     // C constrains f1(T) in constraint-expression
T f1(T x) { return x; }

template<C T>       // C, as a type-constraint, constrains f2(T)
T f2(T x) { return x; }
— end example
 ]
A concept-definition shall appear at namespace scope ([basic.scope.namespace]).
A concept shall not have associated constraints.
A concept is not instantiated ([temp.spec]).
Note
:
A concept-id ([temp.names]) is evaluated as an expression.
A concept cannot be explicitly instantiated ([temp.explicit]), explicitly specialized ([temp.expl.spec]), or partially specialized.
— end note
 ]
The constraint-expression of a concept-definition is an unevaluated operand ([expr.context]).
The first declared template parameter of a concept definition is its prototype parameter.
A type concept is a concept whose prototype parameter is a type template-parameter.